Vertical Tensile Tester LVTT-T2011

Introduction

We provide Vertical Tensile Tester is built for the ability to test the tensile strength of various materials. Our tensile tester mainly measures the tensile, compression, adhesion, peeling, tearing, etc.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Vertical Tensile Tester  is built for the ability to test the tensile strength of various materials like metal, rubber, plastic, leather, paper, composite materials, etc. Our tensile tester mainly measures tensile, compression, adhesion, peeling, tearing, etc.

Specifications

Capacity ()	1KN (optional 10N~1KN force sensor)
Control Method	Full computer control mode, powerful software
Unit of Force	N, kN, gf, kgf, lbf, kP, tf(SI), tf (long)...
Unit of Length	Mm, cm, Inch, m, km, um..
Force Resolution	1/1,000,000
Accuracy	±0.1%
Stroke Resolution	1/1,000,000mm
Effective Stroke	450mm
Speed Range	0.01~500mm/min; (Customizable)
Test Space	Diameter Φ115mm
Shutdown Mode	Overload stop, emergency stop key, automatic stop for test piece destruction, automatic stop for upper and lower limit setting
Machine Power	Servo motor drive
Dimensions	40×37×95cm (W×D×H)
Machine Net Weight	28KG
Power	100W
Power Supply	220V 50~60HZ
Machine Accessories	1 communication cable, 1 software
Optional Accessories	Tensile jig, compression jig, etc.; (according to different test standards to buy different jigs)

Features

Compact design 

Customizable 

Flexible Data output unit

Highly efficient

User-friendly

FAQs

1. How is the Vertical Tensile Tester calibrated?

Calibration is done using certified standard weights or calibration equipment traceable to national metrology standards. It can be calibrated manually or through automated software prompts. It’s recommended to perform calibration annually or semi-annually depending on usage to maintain test accuracy and ensure compliance with / standards.

2. What kind of grips or fixtures is available for the Vertical Tensile Tester?

Vertical Tensile Tester supports a wide range of grips including wedge grips, pneumatic grips, compression plates, peel test grips, three-point bend fixtures, and more. These accessories can be quickly mounted or changed based on the material and type of test required. Proper grip selection ensures accurate and repeatable results.

3. Can I conduct cyclic or fatigue tests on the Vertical Tensile Tester?

Some advanced configurations of the Vertical Tensile Tester support limited cyclic testing, such as cyclic loading or preconditioning tests. However, for high-cycle fatigue tests, a specialized fatigue testing machine is recommended. Always consult the technical specification to verify cyclic capabilities.

4. Does the Vertical Tensile Tester come with a safety enclosure or emergency stop?

Yes, safety is a key feature of the Vertical Tensile Tester. It includes emergency stop buttons, safety limit switches, overload protection, and in some cases, optional transparent enclosures to protect users during high-force tests. Operators should always follow safety guidelines and wear protective equipment when necessary.

5. What power supply is required for the Vertical Tensile Tester?

The Vertical Tensile Tester generally operates on a single-phase 220V AC power supply, though some larger models may require three-phase input. Power specifications can vary by region, so it's important to verify compatibility before installation. Always use a dedicated power source with grounding for best performance and safety.