Temperature And Humidity Test Chamber LTHC-T2021

Introduction

Temperature and Humidity Test Chamber capacity of 1000 performance optimizes energy consumption while maintaining high functionality.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Temperature and Humidity Test Chamber is a testing device that simulates specific environmental conditions to evaluate product performance and durability. It is widely used in industries like electronics, automotive, and pharmaceuticals for quality control and research.

Specifications

Capacity	1000 L
Temperature Range	-40℃ to +150℃
Temperature Fluctuation	±0.5℃
Temperature Uniformity	≤2.0℃
Temperature Deviation	±2.0℃
Heat-up Rate Non-linear	-40℃ to +100℃ 45 min
Cool-down Rate Non-linear	+20℃ to -40℃ 60 min
Humidity Range	20% R.H to 98% R.H
Humidity Fluctuation	±2.0 %RH
Humidity Uniformity	±3.0 %RH
Humidity Deviation	±3.0 %RH (>75%RH)
Noise Level	≤68 dB
Power Consumption	14 kW
Power Supply	AC 3ψ4 W 380 V 50 Hz
Dimensions (W × D × H)	1000 × 1000 × 1000 mm
Exterior Dimensions (W × D × H)	1200 × 1980 × 2025 mm

Features

Even air distribution

Highly accurate sensors

Automated data recording

Multi-Purpose testing unit

Corrosion-resistant interior

FAQs

1. Can a Temperature and Humidity Test Chamber be used for pharmaceutical stability testing?

Yes, It chambers are widely used in pharmaceutical stability studies, ensuring drug formulations maintain their effectiveness, shelf life, and compliance under controlled environmental conditions.

2. Can these chambers be used for textile and fabric testing?

Yes, It chambers are ideal for textile and fabric testing, helping assess moisture absorption, shrinkage, colorfastness, and overall durability under controlled temperature and humidity conditions. By simulating real-world environmental factors, these chambers ensure that textiles maintain quality, strength, and performance across different climates and usage scenarios.

3. How does altitude affect temperature and humidity control?

Lower air pressure affects heat transfer and reduces moisture retention at higher altitudes, potentially impacting temperature and humidity control. It chambers are specially calibrated to compensate for these variations, ensuring consistent performance and accurate environmental simulation across different altitude conditions. This makes them suitable for aerospace, electronics, and material testing applications in diverse environments.

4. What is the impact of humidity on plastic and polymer materials?

High humidity levels can cause swelling, warping, or degradation in polymers and plastics. It chambers are used to assess material resistance to moisture-related stress and aging.

5. Can the chamber be programmed for cyclic testing?

Yes, It chambers support automated cyclic testing, where users can program repetitive temperature and humidity fluctuations to simulate real-world environmental conditions.

6. Can the chamber simulate tropical environmental conditions?

Yes, It chambers can replicate high heat and humidity levels found in tropical regions, making them ideal for testing food, pharmaceuticals, and consumer products meant for such climates.

7. How often should humidity sensors be calibrated?

To maintain accuracy, humidity sensors should be calibrated every 6–12 months, depending on usage intensity and industry standards. It provides sensor calibration services to ensure precise performance.