Automatic Refractometer LAR-T2015

Introduction

Automatic Refractometer features a temperature control range of 5℃ to 85℃, allowing precise temperature sample testing. It provides Peltier temperature control mode for stable sample temperature regulation across a wide range for accurate refractive index. The refractometer has a high-resolution linear detector, accurately determining the sample’s refractive index through critical-angle detection. Our automatic refractometer offers a corrosion-resistant design, enhancing durability in the laboratory environment.

This analytical equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Automatic Refractometer measures the refractive index of a liquid by detecting the critical angle of total internal reflection. It is widely used in pharmaceuticals, food and beverage, semiconductor and research sectors for accurately measuring refractive index.

Specifications

Measurement Range	1.3000 to 1.7000 (nD)
Resolution	0.00001
Precision	±0.00001
Measurement Accuracy	±0.00001
Correction Point	Multi-point fitting system
Brix Range	0 to100%
Brix Resolution	±0.1%
Accuracy	±0.05%
Temperature Control Mode	Peltier control temperature
Temperature Controlled Method	No
Temperature Range	0 to100°C
Temperature Control Range	5℃ to 85℃
Temperature Accuracy	±0.02℃
Temperature Control Stability	±0.02℃
Wavelength	589nm
Prism	Sapphire grade
Sample Cell	Stainless steel
Detection Mode	Linear
Output Mode	, RS232, RJ45, SD card, U disk.
Data Storage	32 G
User Management	Four-level
Data Saving Format	, Excel
Audit Tracking	Yes
Dimensions	300 mm ×380 mm ×300 mm
Net Weight	6 kg
Gross Weight	8 kg

Features

Low Sample Requirement

High Grade Sapphire Prism

Automatic Sample Recognition Mode

Wide Measuring Range

Dual Temperature Regulation

FAQs

1. How frequently should automatic refractometers be calibrated and verified for accuracy?

It supplies advanced automatic refractometer . Calibration should ideally be performed daily at the zero point (e.g., distilled water) and weekly using a span standard within the normal measurement range. Full multi-point calibrations at different temperatures and concentrations (e.g., water, toluene) are recommended monthly or after maintenance. Instruments with still require calibration checks when ambient conditions shift by more. Maintain calibration logs with timestamps and results to comply with quality systems. In regulated environments, run IQ/OQ/PQ validation protocols using certified reference fluids. Regular calibration safeguards analytical integrity, minimizes drift, and assures audit readiness.

2. What are common sources of error in automatic refractometer measurements and how are they mitigated?

It supplies advanced automatic refractometer . Fluctuating readings often stem from factors like temperature drift, improper calibration, prism contamination, air bubbles, or inadequate sample volume. Temperature changes-even by can shift refractive index by about 0.0001–0.0002?nD, so precise thermal control and allowing samples to equilibrate is vital. Dirty or scratched prisms distort the critical-angle boundary, causing inaccurate results—routine cleaning after each sample is essential. Air bubbles may reflect up to 10% of light, generating up to 5% concentration errors. Ensuring complete prism coverage and using automated quality-check routines—like “Smart Measure” or sample-load sensors-helps detect poor loading. Proper calibration with multiple standard sealed reference fluids, and scheduled verification routines further reduce drift and inaccuracies. By addressing these issues proactively, accuracy and repeatability are maintained at top performance levels.

3. How is sample loading and prism cleanliness verified in modern automatic refractometers ?

automatic refractometers use optical sensors and software algorithms to monitor sample loading and cleanliness. Systems like Rudolph’s J series offer “Smart?Measure”, which detects both prism cleanliness and adequate sample coverage, preventing measurement until standards are met. The sensor examines intensity gradients and prism calibration metrics, prompting users to clean or reload if conditions are suboptimal. This ensures sample consistency and prevents cross-contamination errors, especially with sticky or viscous fluids. Log files record these checks, helping with traceability and QA compliance. With this feature, operators avoid manual guesswork and gain reliable, repeatable measurements. These safeguards elevate instrument reliability in high-volume production or regulated lab environments.

4. What are best practices for cleaning an automatic refractometer for optimal performance?

Clean the prism immediately after each measurement using a soft, lint-free cloth dampened with water or a mild solvent like ethanol; this prevents residue buildup that can distort readings. Avoid vigorous rinsing under running water—these instruments aren't fully waterproof. For oily or sticky samples, use compatible cleaning solutions (e.g., ethanol, acetone) based on sample type. After cleaning, verify with a water reference measurement to confirm clarity. Automatable systems may include built-in rinse and dry cycles, ideal for high-throughput environments. Record each cleaning event in a log for traceability, especially in regulated labs. Use calibrated pipettes or spatulas to apply samples consistently. These steps maintain accuracy, extend instrument life, and ensure clean, reproducible results.

5. How often should automatic refractometers be calibrated and why?

It supplies advanced premium automatic refractometer . Perform a zero-point calibration daily using distilled water, and a span check weekly with standard fluids to ensure measurement consistency. Full multi-point calibrations should be conducted monthly or after maintenance to verify linearity across the range. Ambient temperature fluctuations can skew readings, so regular calibration is essential. Instruments with Automatic Temperature Compensation () require calibration at controlled room temps to ensure accuracy. Calibration logs—with timestamps and standards used—support compliance with quality systems and audits. Use certified fluids (like Brix or specific refractive index liquids) aligned with your sample range. Adhering to this schedule minimizes drift and ensures precision in critical analyses.