High And Low Temperature Circulator LHLTC-T2012

Introduction

High and operates within a working range of -30 to 200°C, supporting thermal control in processes needing both high heat and low cooling. The tool-free access panels allow quick maintenance without interrupting setups. Its compressor power ensures reliable function during extended temperature transitions. Our temperature Circulator is used in pilot lines, fermentation systems, and chemical processing setups.

This baths and circulators is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

High and Low Temperature Circulator delivers external hot and cold fluid to support systems that require regulated thermal conditions during laboratory and pilot-scale operations. This ensures consistent temperature stability for bioreactors, extraction units, and processing setups throughout various operational stages.

Specifications

Working Temperature Range	-30 to 200°C
Ambient Temperature	5 to 35°C
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±1°
Temperature Sensor	PT100
Circulating Pump Pressure	Less than or equal to 0.4 MPa
Circulating Pump Lift	4 to 6 m
Max. Reactor Volume Can Be Matched	10 L
External Input	External Sensor Port
Cooling Capacity	3486 W
Heating Power	3000 W
Compressor Power	1103 W
Circulating Pump Power	100 W
Power Consumption	4570 W
Power Supply	Single Phase 220V / 50Hz
Dimensions (W × D × H)	600 × 640 × 890 mm
Net Weight	105 kg

Features

Auto-regulated thermal switch

Reactor-height compatible delivery

Splash-resistant control interface

Bypass-free flow integrity

Load-balanced internal circulation

FAQs

1. Can the High and Low Temperature Circulator be used in compact or restricted lab setups?

High and Low Temperature Circulator is designed with a footprint that supports integration into limited-space environments without interfering with surrounding equipment. Its layout allows technicians to operate or monitor the system even when space between systems is narrow. The rear-side heat flow prevents accumulation of warm air around sensitive tools. It offers flexibility in positioning for multi-station setups. The sturdy frame and accessible panel placement simplify installation under benches or within mobile carts. This supports labs that rotate systems between zones. Compact labs or mobile testing units benefit from its smart spatial orientation. You can install it where larger chillers would be unfeasible.

2. Is the High and Low Temperature Circulator suited for environments with high humidity or moisture exposure?

The High and Low Temperature Circulator has been built to perform reliably in zones where humidity levels tend to fluctuate or remain consistently high. Its internal circuitry and wiring are enclosed in moisture-tolerant compartments. This supports continued operation in food labs, beverage pilot rooms, and fermentation facilities. The system avoids corrosion-related faults thanks to its protective finishes and ventilation placement. It is capable of operating without surface condensation affecting thermal transfer lines. There’s no loss in cooling or heating behavior in humid surroundings. Bio-processing zones with open water sources are compatible with its operation. It performs reliably where moisture-prone conditions are standard.

3. Can the High and Low Temperature Circulator be operated near temperature-sensitive lab instruments?

High and Low Temperature Circulator works quietly and emits minimal vibration, making it suitable for areas near temperature-dependent or signal-sensitive instruments. Its insulated paneling limits thermal radiation from reaching nearby devices. The positioning of the exhaust avoids affecting calibration tools or analytical sensors. Its heat dispersion remains controlled so it doesn't interfere with parallel systems. This means your balances, sensors, or high-sensitivity analyzers will operate without thermal drift. Ideal for cleanroom-grade benches or calibrated platforms. It can function in shared workstations without thermal interference. Accuracy-focused labs can depend on its calm thermal behavior.

4. Does the High and Low Temperature Circulator support equipment installed at various elevation levels?

High and Low Temperature Circulator can be connected to reactors or processing vessels placed above or below the unit’s height. It manages fluid movement without stalling or reverse-flow issues during elevation changes. Whether installed under a jacketed reactor or alongside a vertical tank, the flow stays balanced. This makes it suitable for multi-tiered lab equipment setups or pilot halls. The unit remains unaffected by elevation-based flow resistance. Its thermal consistency is retained across equipment regardless of placement. Ideal for labs with stacked fermentation lines or tall column assemblies. It adapts to varied height-based workflows.

5. Can the High and Low Temperature Circulator be used during automated or remote process control?

High and Low Temperature Circulator includes external sensor port compatibility, which enables it to respond to temperature signals from connected equipment. This function helps it operate in synchronization with automated pilot systems. Temperature shifts in the main system prompt adaptive responses. This supports dynamic dosing, timed reactions, and controlled phase transitions. Pilot reactors, fermentation tanks, and other equipment can benefit from sensor-based thermal corrections. It works smoothly in -based environments. Users can integrate it with programmable systems or continuous batch lines. It adjusts its output based on feedback signals.

6. Can the High and Low Temperature Circulator be relocated frequently without affecting function?

The High and Low Temperature Circulator is suitable for lab environments where equipment needs to be repositioned between zones or benches. Its structure is designed to remain stable even when moved across floors. Tubing can be reconnected easily without performance drop. There's no delay in restarting after relocation. Perfect for modular labs or mobile stations. Its mobility does not compromise temperature control. Suitable for shared labs with shifting configurations. It maintains its performance after every move.