Multi-T3unctional Air Quality Monitor LAQM-T2028

Introduction

Multi-Functional Air Quality Monitor supports a humidity range of 20% to 85%, for precise monitoring. It includes an audible alarm for high gas levels. The device features laser scattering technology for reliable particulate detection. Its user-friendly interface provides easy access to environmental data. Our sensor detects CO₂, temperature, and particulate matter ensuring air quality while supporting health standards and enhancing occupant well-being.

This air quality monitor is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Multi-Functional Air Quality Monitor ensures indoor air quality by measuring CO₂, temperature, and particulate matter, helping meet health standards and enhance occupant well-being.

Specifications

Measured Parameters	CO2, PM2.5, PM10, PM1.0, Temperature, Humidity
Temperature Range	-10°C to 50°C
Storage Temperature	-10°C to 60°C
Relative Humidity	20% to 85%
Humidity Range	20% to 85%
Atmospheric Pressure	12.5 to 15.4
CO2 Measuring Range	400 to 5000 ppm
PM2.5/1/10 Measuring Range	0 to 999 µg/m³
Detection Method (CO2)	Infrared ()
Detection Method (PM)	Laser Scattering
Sampling Time	1.5 seconds
Power Supply	3000 mAh
Dimensions	145 × 78 × 97.2 mm
Weight	235g

Features

Adjustable Sensitivity Settings

Wide Humidity Range

User-Friendly Mobile App

Backup Battery Supported

Long-Lasting Battery Performance

FAQs

1. What is the ideal placement for the Multi-Functional Air Quality Monitor?

The monitor should be placed in a well-ventilated area, away from direct sunlight and sources of heat or humidity, to ensure accurate readings. Additionally, avoid placing it near open windows or vents. For optimal performance, place it at breathing height in the room, ideally around 1 to 1.5 meters off the ground. This placement helps capture air quality representative of the space's typical conditions.

2. Can one adjust the alarm threshold for CO? levels?

Yes, the alarm threshold for CO? levels can be adjusted via the settings menu or mobile app, depending on the model. One can customize the thresholds based on specific requirements or safety guidelines for environment. This flexibility allows setting different alarm levels for various spaces or situations, ensuring that the monitor alerts when air quality reaches critical levels.

3. How long does it take for the monitor to detect CO? levels after being turned on?

The monitor typically takes a few minutes to stabilize and start providing accurate readings once powered on. This brief warm-up period allows the sensors to calibrate properly, ensuring that the readings reflect the true air quality. During this time, the monitor may display initial fluctuations in the CO? levels before stabilizing.

4. What type of sensors does the Multi-Functional Air Quality Monitor use for particulate matter detection?

The monitor uses laser scattering technology to accurately detect particulate matter (PM2.5, PM10) levels in real-time. This method ensures high precision in measuring dust and other fine particles in the air, providing reliable data for air quality management. It helps in identifying pollution sources and can aid in taking corrective actions to maintain a healthy indoor environment.

5. Can one use the Multi-Functional Air Quality Monitor in a high humidity environment?

Yes, the monitor is designed to operate effectively in environments with humidity levels ranging from 20% to 85%. This makes it suitable for a wide range of indoor spaces, including offices, factories, and homes, ensuring reliable performance even in humid conditions. The device's accurate measurement capabilities remain consistent in varying environmental conditions, allowing for optimal Multi-Functional Air Quality Monitoring.

6. What is the purpose of air quality monitor?

Air quality monitor is an important tool for improving air quality, protecting public health, and ensuring compliance with regulations. It can also be used to monitor climate change or support research and development.

7. What pollutants can the air quality monitor detect?

air quality monitor can detect particulate matter (PM 2.5, PM 10), carbon monoxide, ozone, nitrogen dioxide, sulphur dioxide, volatile organic compounds.

8. How do you use an air quality monitor?

Place the air quality monitor in an area with good airflow and don’t obstruct the air intake vent. For optimal sensor readings, keep your device away from direct sunlight and in open space that’s less than 500 square feet. Avoid placing your device near air vents, such as an AC or heater vent.

9. What are the ideal applications of the air quality monitor?

air quality monitor is ideally suited for use in homes, offices, industrial settings, and outdoor monitoring.

10. What is an Air Quality Monitor?

Air quality monitor is a device that measures the level of common air pollutants including both tiny and large particulate matter. They provide quick and efficient detection of various gases, temperature, humidity, and other parameters. air quality monitor ensure complete monitoring of indoor and outdoor air quality.