Benchtop Ion Meter For Cu, LBIM-T2027

Introduction

Benchtop Ion meter for Cu, comes with (Cu) cupric ion selective electrode for cupric ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

This water testing equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Benchtop Ion meter is used to measure the cupric ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Specifications

Ion measurement range	Cu range: 1×108 - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	communication interface
Connector
Display	(130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Features

Large display

2 - 5 points calibration from low to high concentration

Direct ion concentration readout for elaborate measurement process

Selectable concentration units from ppm, mg / L, mol / L

mV measurements to check the performance of ion selective electrode

Temperature compensation provides accurate reading over the entire range

Stability indicator to show current measurement status

Calibration due reminder for regular calibration of the meter

Auto hold function to freeze stable reading for better viewing & recording

Automatic electrode diagnosis shows the slope of the sensor

Reset setting function

Expanded memory stores and recalls up to 500 readings

Built –in real time clock stamps

communication interface to transfer stored data to PC

FAQs

1. In what types of water samples can It Benchtop Ion meter for Cu, be used for cupric ion measurement?

It Benchtop Ion meter for Cu is designed to measure cupric ion concentrations in a wide range of water types. It can be effectively used with potable water, distilled or deionized water, wastewater, and natural water sources like rivers or lakes. This makes it highly suitable for environmental monitoring, laboratory testing, and industrial water quality analysis. It has wide detection range ensuring accurate results in both low and high concentration samples.

2. How does the auto hold function of Benchtop Ion meter for Cu benefit the user during measurements?

The Benchtop Ion meter for Cu's auto hold function automatically locks the reading once the measurement stabilizes. This helps users avoid recording fluctuating data and makes it easier to note or document precise results. It is useful in research laboratory settings or when multiple samples are being tested. This function also reduces the chances of human error during manual data logging.

3. What safety features of Benchtop Ion meter for Cu help maintain measurement accuracy over time?

Benchtop Ion meter for Cu includes a calibration due reminder that alerts users when recalibration is needed to ensure safe and consistent operation. It also performs automatic electrode diagnostics to check the slope of the sensor and monitor its health. These features prevent inaccurate readings caused by electrode degradation. Regular prompts and diagnostics promote timely maintenance and calibration for long-term accuracy.

4. How does the Benchtop Ion meter for Cu assist with regular maintenance of the ion selective electrode?

The Benchtop Ion meter for Cu allows users to check electrode performance using the mV measurement mode. This helps identify if the electrode's response is weakening or drifting from expected values. Users can detect when the electrode may need cleaning or replacement by evaluating the slope. Regular monitoring like this extends the life of the electrode and ensures reliable measurements.

5. Is the Benchtop Ion meter for Cu easy to use for beginners or non-experts?

Yes, our Benchtop Ion meter for Cu is designed with a large screen for effective monitoring. It features a smart system menu with eight adjustable parameters, such as calibration points and stability settings. The direct ion concentration readout simplifies the process, so even users without technical knowledge can operate it confidently. It offers both manual and automatic modes of shutdown and temperature compensation to suit different skill levels.

6. Can data of Benchtop Ion meter for Cu be easily stored and transferred for reporting?

Yes, the Benchtop Ion meter for Cu includes built-in memory that can store up to 500 sets of data. Each entry is time-stamped using a real-time clock, making it ideal for regulatory compliance and recordkeeping. The interface allows quick data transfer to a computer for further analysis or reporting. This ensures efficient workflow in labs, research institutions, and quality control departments.