Benchtop Ion Meter For Pb, LBIM-T2025

Introduction

Benchtop Ion meter for Pb, comes with (Pb) lead ion selective electrode for lead ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

This water testing equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Benchtop Ion meter is used to measure the lead ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Specifications

Ion measurement range	Pb range: 1×108 – 0.1M, 0.2-20700 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	communication interface
Connector
Display	(130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Features

Large display

2 - 5 points calibration from low to high concentration

Direct ion concentration readout for elaborate measurement process

Selectable concentration units from ppm, mg / L, mol / L

mV measurements to check the performance of ion selective electrode

Temperature compensation provides accurate reading over the entire range

Stability indicator to show current measurement status

Calibration due reminder for regular calibration of the meter

Auto hold function to freeze stable reading for better viewing & recording

Automatic electrode diagnosis shows the slope of the sensor

Reset setting function

Expanded memory stores and recalls up to 500 readings

Built –in real time clock stamps

communication interface to transfer stored data to PC

FAQs

1. What types of industries is the It Benchtop Ion meter for Pb, suitable for?

It Benchtop Ion meter for Pb is ideal for environmental testing labs, industrial wastewater monitoring, and water testing industries. It can detect lead ion concentrations in potable water, deionized water, wastewater, and natural water sources. This makes it essential for compliance with environmental safety regulations and lead pollution control. The meter’s wide detection range of 0.2–20,700 ppm supports both trace and high-level lead monitoring.

2. How does the Benchtop Ion meter for Pb ensure precision in varying lead concentration levels?

The Benchtop Ion meter for Pb allows users to fine-tune accuracy based on their sample type with support for 2 to 5 calibration points and standard solutions. The ±1% F.S. accuracy ensures consistent and dependable readings across its entire concentration range. This level of precision is particularly important when testing for low-level contamination in drinking water or sensitive environments. It is well-suited for laboratories with strict quality standards.

3. How user-friendly is the Benchtop Ion meter for Pb for routine laboratory work?

Benchtop Ion meter for Pb is equipped with a large screen and an advanced system menu, allowing users to quickly navigate and adjust measurement settings. Selectable concentration units (ppm, mg/L, mol/L) offer flexibility for different testing standards or reporting formats. The auto-hold function captures stable readings automatically, minimizing manual effort during testing. These features make it accessible for both experienced lab technicians and new users.

4. How can users monitor the health and performance of the Pb ion selective electrode of Benchtop Ion meter for Pb?

Benchtop Ion meter for Pb offers mV measurement mode to test electrode response, helping verify performance regularly. An automatic electrode diagnosis function displays the slope of the electrode, indicating whether it is functioning within optimal parameters. This allows users to catch issues early and maintain reliable operation. Routine monitoring like this helps avoid unexpected measurement errors.

5. What built-in features of Benchtop Ion meter for Pb support data integrity and traceability?

The Benchtop Ion meter for Pb has a memory capacity for up to 500 data sets and a built-in real-time clock to timestamp every reading. This ensures a complete record of all test results for review, compliance, or reporting. Data can also be transferred via the interface for easy archiving or sharing with other systems. These tools are particularly helpful in labs where audit trails and data security are priorities.

6. How does the Benchtop Ion meter for Pb maintain accurate readings under different temperature conditions?

Benchtop Ion meter for Pb offers both manual and automatic temperature compensation over a range of 0 to 100 °C, helping correct for thermal fluctuations in sample environments. A dedicated temperature probe provides real-time data to support this feature. Accurate temperature control is vital for consistent ion activity readings, especially when analyzing field samples or heated solutions. This ensures results remain stable across diverse applications.