Rubber Low temperature brittleness tester TRBT-T2012

Introduction

Rubber has an impact temperature range of -80 ℃ to + 30 ℃ and accuracy of ± 0.5 ℃. Equipped with pneumatic cylinders for raising the test rig and has computerized control of temperature rise for the convenience of the user. Designed with steel casing having epoxy paint for prevention of corrosion of tester and for making it a low maintenance device. This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Rubber Low temperature brittleness tester is widely used for comparative analysis of functional performance for non-rigid plastic and other elastic materials across scientific research, quality analysis, rubber, and plastic industries etc.

Specifications

Air supply	6 bars
Impact temperature range	-80 to + 30 ℃
Sensor	Pt 100, 1/3
Accuracy	± 0.5 ℃
Resolution	0.01 m/s
Specimen types	A and B
Test pieces	6
Communication	RS232 interface

Features

Pneumatic cylinders for raising the test rig for the convenience of the user

Air supply of 6 bar for the ease of the user

Falling weight tester for accurate determination process

Computerized control of temperature rise for the convenience of the user

Impact temperature range is - 80 to + 30 ℃ and accuracy is ± 0.5 ℃

Resolution is 0.01 m/s and has temperature controller with 0.1 ℃ set point

Steel casing with epoxy paint for enhancing durability of the tester

Solid state relay for secured control of the switch

Run time meter for ease of the operator

Temperature sensor is proximal to the samples

FAQs

1. What are the key factors to consider when selecting this test equipment for laboratory use?

When selecting this test equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this test equipment be calibrated to ensure accurate results?

It is recommended to calibrate this test equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this test equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this test equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this test equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the test equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.