Ash Content Tester LACT-T2010

Introduction

Ash Content Tester is the device composed of muffle furnace, temperature controller and electric heating plate. It is small size and needs less land with special fire-resistant material and heating components. The heating time is short and it has a long lifetime. It used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and petroleum products.

This petroleum testing is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Ash Content Tester is used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants.

Specifications

Electric Muffle Furnace - Controlled Temperature	775 ± 25 ℃
Electric Muffle Furnace - Temperature Rising Time of Empty Chamber	≤ 50 min
Electric Muffle Furnace -Furnace Temperature Uniformity	≤ 15 ℃
Electric Muffle Furnace - Internal Dimension	200 × 120 × 80 mm
Electric Muffle Furnace - External Dimension	490 × 490 × 450 mm
Electric Muffle Furnace - Power Consumption	2.5 kW
Electric Muffle Furnace - Power Supply	AC 220V ±10%, 50 Hz
Electric Muffle Furnace - Net Weight	35 kg
Temperature Controller – Maximum Control Temperature	1200 ℃
Temperature Controller – Dimension	500 × 300 × 235 mm
Temperature Controller – Power Consumption	5000 W
Temperature Controller – Power Supply	AC 220V ±10%, 50 Hz
Temperature Controller – Net Weight	5 kg
Electric Heating Plate – Heating Power	(1 to 6) grades, continuously adjustable
Electric Heating Plate – Temperature	400 ℃
Electric Heating Plate – Diameter of Heating Plate	Φ 180 mm
Electric Heating Plate – Dimension	280 × 250 × 90 mm
Electric Heating Plate – Power Consumption	2000 W
Electric Heating Plate – Power Supply	AC 220V ±10%, 50 Hz

Features

It is composed of muffle furnace, a temperature controller and electric heating plate

Muffle furnace adopts all-in-one structure

Equipped with special fire-resistant material and heating components

Adjustable and designed with temperature controller

The overshoot is small and temperature control is stable

Material used cold-roll steel sheet of outer shell furnace

Good anti-corrosion and long life time

FAQs

1. What does the Ash Content Tester measure in petroleum products?

It Ash Content Tester measures the amount of inorganic residue, or ash, left after burning a petroleum sample. High ash content can indicate contamination or metallic additives, which may cause engine deposits or corrosion. This helps ensure the fuel meets quality standards. The tester is also useful for checking material purity in research and industrial applications.

2. Can the Ash Content Tester handle multiple tests per day?

The Ash Content Tester is built for repeated daily use with minimal cooldown time. Its efficient heating and robust design make it suitable for high-throughput labs. With proper handling and cleaning between cycles, multiple samples can be tested in succession. Having multiple crucibles on hand helps streamline workflow further.

3. How is the heating performance of the muffle furnace in the Ash Content Tester optimized?

Ash Content Tester features a muffle furnace with high-quality heating elements that ensure fast heat-up and uniform temperature distribution. It reaches 775?°C in less than 50 minutes and maintains temperature uniformity within 15?°C. This stable performance is crucial for obtaining accurate and repeatable ash content results. The furnace chamber is engineered for even airflow, minimizing hot spots and ensuring consistent combustion.

4. Does the Ash Content Tester require any special installation?

The Ash Content Tester is a benchtop unit and does not need special installation or ventilation systems, but it should be placed in a well-ventilated lab. It only requires standard electrical connections and a heat-resistant surface. Users should ensure proper grounding and follow safety guidelines from the manual. Once installed, it's ready for immediate use with the included accessories.

5. Are there any built-in safety features in the Ash Content Tester ?

Ash Content Tester is equipped with heat-resistant materials and insulated construction to prevent external surface overheating. The temperature controller offers stable output with minimal overshoot, reducing the risk of thermal shock. Users are also protected by secure housing and grounded wiring. Adhering to usage guidelines further enhances safe operation in any lab setting.