Alcohol Tester T-S2TR-S2110

Introduction

Alcohol Tester provides efficient testing capacity over 100 breath tests per full battery cycle. It features a digital LED interface that ensures clear visibility during low-light environments. It offers wide working temperature within 0℃ to 50℃ and up to 95% relative humidity. Built with four preset limits such as 0.05%BAC, 0.50‰BAC, 0.25mg/L, and 0.50g/L. Alcohol Tester is designed with a semiconductor module facilitates responsive breath sampling and stable evaluation.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Alcohol Tester is essential for traffic checkpoints to screen driver sobriety and uphold safety regulations under law enforcement and road safety protocols.

Specifications

Sensor Type	Semiconductor sensor
Detection Range	0.00 to 0.20%BAC, 0.00 to 2.00‰BAC
Measurement Accuracy	±0.01% BAC at 0.05% BAC
Pre-Set Level	0.05%BAC; 0.50‰BAC; 0.25mg/L; 0.50g/L
Warm-Up Time	35 seconds
Testing Time	Less than 8 seconds
Test Capacity Per Full Charge	Over 100 breath tests
Display	LED
Working Temperature	0℃ to 50℃, less than or equal to 95% RH (non-condensing)
Power Supply	2×AA batteries
Dimension	103 mm × 65 mm × 27 mm
Packaging Dimension	450 mm × 330 mm × 390 mm
Net Weight	50g
Packaging Weight	11 kg
Repeatability	≤2% RSD

Features

Audible And Visual Alarm

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Fault Self-Detection Sensor

Easy Battery Replacement

Pocket-Friendly Design

Replaceable Mouthpiece

FAQs

1. What is the main function of this Breath Alcohol Analyzer?

It is a professional laboratory instrument designed for Breath Alcohol Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Breath Alcohol Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Breath Alcohol Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Breath Alcohol Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Breath Alcohol Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.