Alcohol Tester T-S2TR-S2109

Introduction

Alcohol Tester requires 35 seconds of warm-up time before initiating breath check sessions. It features a broad detection range between 0 to 0.20% BAC and up to 2.00 g/L. Integrated with a semiconductor sensor that delivers consistent results across varied ambient conditions. Built with a compact structure that offers effortless portability during transport and handling. Alcohol Tester supports contactless blowing for non-invasive workplace screening or field sobriety checks.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Alcohol Tester is ideal for transportation hubs to screen drivers and staff for sobriety before duty in airports, bus depots, and logistics terminals.

Specifications

Sensor Type	Semiconductor sensor
Detection Range	0 to 0.20%BAC (0 to 1.0mg/L; 0 to 2.00‰BAC; 0 to 2.00g/L)
Measurement Accuracy	±0.01% BAC at 0.05% BAC
Resolution	0.01% BAC
Warm-Up Time	35 seconds
Display	LCD
Working Temperature	0℃ to 50℃, less than or equal to 80% RH
Storage Temperature	0℃ to 50℃, less than or equal to 90% RH
Power Supply	2×1.5V AAA batteries
Dimension	125 mm × 37 mm × 20 mm
Packaging Dimension	450 mm × 330 mm × 390 mm
Net Weight	41 g (without battery)
Packaging Weight	11 kg
Repeatability	≤2% RSD

Features

Green And Red Signal Lights

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

LCD Interface

Smooth Slide Cover 

Dual Batteries

Energy-Efficient

FAQs

1. What is the main function of this Breath Alcohol Analyzer?

It is a professional laboratory instrument designed for Breath Alcohol Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Breath Alcohol Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Breath Alcohol Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Breath Alcohol Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Breath Alcohol Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.