Galvanostat T-GAT-S2100

Introduction

Galvanostat offers potential control range of ±10V and current control range of ±2.0A. Equipped with high control accuracy of 0.1% full scale reading for both potential and current. Incorporated with fast potential rise time of less than 1mS (less than 10mA) and less than 10mS (less than 2A) ensuring definite performance. It includes potential resolution of 10mV (less than 100Hz), 3mV (less than 10Hz) and current sensitivity of 1pA. Galvanostat is widely applied in electrochemical research, material testing, and battery analysis.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Galvanostat is employed for studying electrochemical reactions, corrosion analysis, and battery testing. It is widely applied in research labs, material science, and energy storage development.

Specifications

Potential Control Range	±10 V
Current Control Range	±2.0 A
Potential Control Accuracy	0.1% × FS ±1 mV
Current Control Accuracy	0.1% × FS
Potential Resolution	10 mV (>100 Hz), 3 mV (
Current Sensitivity	1 pA
Potential Rise Time	Less than 1 ms (less than 10 mA), less than 10 ms (less than 2 A)
Reference Electrode Input Impedance	10¹² Ω
Current Range	2 nA ~ 2 A (10 steps)
Tank Pressure	±21 V
Max Output Current	2.0 A
CV & LSV Scanning Speed	0.001 mV to 10000 V/s
CA & CC Pulse Width	0.0001 to 65000 s
SWV Frequency	0.001 to 100 KHz
DPV & NPV Pulse Width	0.0001 to 1000 s
Low-pass Filter	8 Segments Programmable
Range Setting	Automatic (Current & Potential)
Signal Generator Frequency Response	10 Hz to 1 MHz
Frequency Accuracy	0.005%
AC Signal Amplitude Range	1 mV to 2500 mV
Signal Resolution	0.1 mV RMS
IMP Frequency	10 Hz to 1 MHz
DC Bias	-10 V to +10 V
DDS Output Impedance	50 Ω
Waveforms	Sine, Triangular, Square
Scanning Modes	Logarithmic / Linear, Increase / Decrease
Signal Analyzer Integration Time	10 ms to 10⁶ cycles (max 10⁵ s)
Automatic Potential Compensation	-10 V to +10 V
Current Compensation Range	-1 A to +1 A
Interface	USB
Power Consumption	100 W
Power Supply	AC 90V to 240V
Dimensions	550×400×250 mm
Gross weight	9 Kg

Features

USB communication port

Battery testing functions

Electrochemical noise

Solution resistance test

Standard Accessories

FAQs

1. What is the main function of this Galvanostat?

It is a professional laboratory instrument designed for Galvanostat applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Galvanostat compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Galvanostat?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Galvanostat?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Galvanostat shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.