Potentiostat System T-PST-S2101

Introduction

Potentiostat System offers CV scan rates up to 0.000001 V/s to 10,000 V/s for flexible analysis. Equipped with high-resolution signal generator and multi-channel functionality for simultaneous sample testing. It features safe operations with corrosion analysis, sensing and energy storage studies. Built with digital display, stable current with bias circuit and programmable workflow. Potentiostat is ideal in academic, industrial, environmental and research laboratories.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Potentiostat System is ideal for corrosion, material degradation analysis, and electrochemical surface characterization in academic, industrial, environmental and research laboratories.

Selection Guide

Potentiostat System is a high-performance electrochemical workstation designed for applications such as corrosion testing, battery analysis, electrodeposition, and electrochemical sensing. Based on research studies, it supports flexible electrode configurations (2-, 3-, and 4-electrode setups), making it suitable for both fundamental and advanced experiments. With a maximum potential range of ±10 V, a current range of ±250 mA, a compliance voltage of ±13 V, and a fast rise time of less than 1 μs, it ensures accurate and responsive measurements. This system also complies with essential quality and safety certifications, providing researchers and professionals with a reliable, certified system for various electrochemical applications. Customers can select this model based on their requirements for precision, versatility, and trusted performance in scientific and industrial research.

Specifications

Electrode Configuration	2-, 3-, and 4-electrode
Maximum Potential Range	±10 V
Maximum Current	±250 mA
Compliance Voltage	±13 V
Potentiostat Rise Time	Less than 1 μs
Potentiostat Bandwidth	1 MHz
Potential Ranges	±10 mV, ±50 mV, ±100 mV, ±650 mV, ±3.276 V, ±6.553 V, ±10 V
Potential Resolution	0.0015%
Potential Accuracy	±1 mV or ±0.01%
Potential Noise	Less than 10 μV RMS
Current Measurement Range	±10 pA to ±0.25 A
Current Resolution	0.0015%
Current Accuracy	0.2%
Input Bias Current	Less than 10 pA
Scan Rates (CV/LSV)	0.000001 V/s to 10,000 V/s
Potential Increment (CV)	0.1
Pulse Width (CA/CC)	0.0001 to 1000 s
Sampling Interval (CA/CC)	0.4 μs
DPV/NPV Pulse Width	0.001 to 10 sec
SWV Frequency	1 Hz to 100 kHz
ACV Frequency Range	0.1 Hz to 10 kHz
SHACV Frequency Range	0.1 Hz to 5 kHz
FTACV Frequency Range	0.1 Hz to 50 Hz
AC Impedance Frequency	0.00001 Hz to 3 MHz
AC Impedance Amplitude	0.00001 V to 0.7 V RMS
Current Offset Accuracy	0.003%
Memory Capacity	256,000 to 16,384,000 points
Dimensions	370 × 230 × 120 mm
Net Weight	6 kg

Features

Fast response time

Multiple step potential

Internal flash memory 

Energy-efficient

Low maintenance 

FAQs

1. What is the main function of this Potentiostat System?

It is a professional laboratory instrument designed for Potentiostat System applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Potentiostat System compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Potentiostat System?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Potentiostat System?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Potentiostat System shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.