Plant Nutrition Analyzer T-PNA-S2100

Introduction

Plant Nutrition Analyzer simultaneously measures chlorophyll, nitrogen, temperature, and humidity. It minimizes external light and temperature impact through multi-layer anti-interference shielding structure. It offers insights to support optimized fertilization decisions based on real-time plant data. It calculates and shows average, peak, and lowest values from most recent 30 readings. Plant Nutrition Analyzer is ideal for plant physiology research, nutrient monitoring, and crop management.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Plant Nutrition Analyzer is ideal for enhancing crop practices, boosting yields, and supporting plant physiology studies in agriculture, forestry, and plant research.

Specifications

Measuring Range	Chlorophyll: 0.0 to 99.9 SPAD, Leaf Surface Temperature: -10 to 99.9°C, Nitrogen Content: 0.0 to 99.9 mg/g, Leaf Surface Humidity: 0.0 to 99.9% RH
Measurement Accuracy	Chlorophyll: ±1.0 SPAD (0 to 50 SPAD range at room temp), Leaf Surface Temperature: ±0.5°C, Nitrogen Content: ±5%, Leaf Surface Humidity: ±0.5%
Repeatability	Chlorophyll: ±0.3 SPAD (0 to 50 SPAD range), Leaf Surface Temperature: ±0.2°C, Nitrogen Content: ±0.5 units, Leaf Surface Humidity: ±0.5%
Measurement Area	2 × 2 mm
Maximum Measured Thickness	1.2 mm
Measurement Time Interval	2 seconds
Data Storage Capacity	2000
Power Supply	2 × 1.5V dry batteries
Dimension	320 × 250 × 200mm
Weight	2.5 kg

Features

Multi-Point Segment Calibration 

High-Definition OLED Display 

Non-Destructive Testing 

Low Battery Reminder 

Bluetooth Wireless Transmission 

Data Viewing and Monitoring

FAQs

1. What is the main function of this Plant Nutrition Analyzer?

It is a professional laboratory instrument designed for Plant Nutrition Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Plant Nutrition Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Plant Nutrition Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Plant Nutrition Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Plant Nutrition Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.