Dry Bath Incubator T-DRI-S2104

Introduction

Dry Bath Incubator controlled range from RT+5℃ to 150℃. Equipped with overheat protection mechanism to ensure uninterrupted performance. Designed with removable block modules, allowing effortless cleaning and minimal maintenance. Integrated with automatic fault detection system for timely operational alerts. Dry Bath Incubator features temperature calibration function to maintain consistent internal conditions.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Dry Bath Incubator is employed in thermal incubation processes for enzyme reactions, nucleic acid denaturation, protein studies, and clinical diagnostics.

Specifications

Maximum Temperature	150℃
Temperature Control Range	RT+5℃ to 150℃
Temperature Stability at 40℃	±0.3℃
Temperature Stability at 100℃	±0.5℃
Temperature Stability at 120℃	±1℃
Heating Up Rate	10m (20℃ to 100℃), 30m (20℃to 150℃)
Display Accuracy	0.1℃
Timer	1m to 99h 59m/0: infinite time
Display	LED
Power Consumption	400W
Dimension (W × D × H)	220×260×100 mm

Features

LED display

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Robust housing structure

Low energy consumption

Adjustable digital timer

Buzzer alarms

FAQs

1. What is the main function of this Dry Bath Incubator?

It is a professional laboratory instrument designed for Dry Bath Incubator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Dry Bath Incubator compared to similar products?

It offers precise environmental control, effective contamination prevention measures, and intuitive operation interface. The uniform temperature and gas distribution inside the chamber ensure consistent culture results for sensitive biological samples.

3. What regular maintenance is required for this Dry Bath Incubator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Dry Bath Incubator?

Installation should meet: 1) Placing the instrument in a well-ventilated area with at least 10cm clearance around the sides and back for heat dissipation; 2) Ensuring a stable, level surface capable of supporting the instrument's weight; 3) Connecting to a dedicated power supply with appropriate voltage and grounding to prevent electrical issues; 4) Avoiding direct sunlight, heat sources, and areas with high humidity or dust.

5. What should I do if the Dry Bath Incubator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.