CO Gas Detector T-COD-S2100

Introduction

CO Gas Detector detects carbon monoxide with 0 to 1000 ppm range. It features hot-pluggable design for easy maintenance after installation and continuous gas detection. Equipped with magnetic wand, it enables safe and simple menu navigation in explosive areas. Incorporates relay output set for direct communication with control systems or alarms. Gas Detector ensures gas level monitoring in industrial plants, confined spaces, and gas processing units.

Adopts advanced sensor technology with NIST-traceable calibration certificates. Built-in self-diagnostic function continuously monitors instrument status, ensuring reliable detection results.

Applications

CO Gas Detector enables carbon monoxide monitoring in confined areas, industrial zones, garages, boiler rooms, and gas facilities, ensuring workplace safety and protection in hazardous environments.

Specifications

Gas Detected	Carbon monoxide
Measurement Range	0 to 1000 ppm
Detection Principle	Electrochemistry
Resolution	1 ppm
Accuracy	Less than or equal to ±2 to 5% FS
Display	LED display
Working Temperature Range	-20 to 55℃
Working Pressure	86 to 106 kPa
Power Dissipation	Toxic gas: Less than or equal to 2.5W, Flammable gas: Less than or equal to 4W
Communication Mode	4 to 20mA, RS485
Wireless Transmission	LORA
Housing Material	Die-cast aluminium
Electrical Interface	Standard internal screw thread M20 × 1.5
Protection Grade	IP66/68
Explosion-Proof Grade	IECEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb ；ATEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb
Power Supply	24VDC
Dimension	157.8×128.8×69.6 mm
Net Weight	1 Kg
Gross Weight	1.5 Kg

Features

Explosion-proof protection

Water-dust resistant

Modular sensor chamber

Lightweight body

Quick installation

Analog signal output

FAQs

1. What is the main function of this Co Gas Detector?

It is a professional laboratory instrument designed for Co Gas Detector applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Co Gas Detector compared to similar products?

It incorporates advanced technologies including self-diagnostic function, ensuring superior performance in terms of stability, accuracy, and operational convenience. The durable construction and strict quality control also guarantee long service life and low maintenance costs.

3. What regular maintenance is required for this Co Gas Detector?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Co Gas Detector?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Co Gas Detector shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.