Thermal Circulator T-TMC-S2114

Introduction

Thermal Circulator boasts generous capacity of 100 liters. It features fully enclosed compressor for high efficiency and low noise operation. Equipped with dedicated bath fluid inlet and outlet ports to support efficient thermal transfer to external systems. Incorporates leak, overheating, and overcurrent protection to ensure safe and uninterrupted workflow. Circulator manages temperature effectively in reactors, pharmaceuticals, and extraction units.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Thermal Circulator employed for controlling temperature in reactors, semiconductors, fermentation tanks, pilot lines, UV cooling, extraction units, and sensitive food and pharmaceutical processes.

Specifications

Volume	100 L
Working Temperature Range	-40 to 200℃
Flow Rate	42 L/min
Pressure	Less than or equal to 0.4 MPa
Pump Lift Range	22 m
Temperature Sensor	PT100
Refrigerant	R404
Ambient Temperature Range	5 to 35℃
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±0.1℃
External Input	External sensor port
Heating Power	9000W
Compressor Power	5145W
Cooling Power	16368W
Circulating Pump Power	370W
Power Consumption	15000W
Power Supply	380V/50Hz
Dimensions (W×D×H)	730×880×1230 mm
Weight	200 Kg

Features

Liquid level display

Digital control panel

Pressure gauges

Precooling function

Brazed plate exchanger

Mobility casters

Ventilation window

FAQs

1. What is the main function of this Thermal Circulator?

It is a professional laboratory instrument designed for Thermal Circulator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Thermal Circulator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Thermal Circulator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Thermal Circulator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Thermal Circulator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.