Thermal Circulator T-TMC-S2112

Introduction

Thermal Circulator is designed to offer 50 liters of capacity. It features built-in precooling function for rapid transitions between heating and cooling operations. Equipped with fully enclosed compressor, it ensures high efficiency and low operational noise levels. Incorporates ventilation windows and casters for enhanced airflow and easy movement in laboratory environments. Circulator supports temperature control in lab, pharma, and food systems.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Thermal Circulator works well for managing temperature in reactors, semiconductors, fermentation tanks, peptide setups, pilot lines, UV cooling, extraction units, calorimeters, and sensitive food or pharma systems.

Specifications

Volume	50 L
Working Temperature Range	-80 to 200℃
Flow Rate	30 L/min
Pressure	Less than or equal to 0.4 MPa
Pump Lift Range	15 m
Temperature Sensor	PT100
Refrigerant	R404
Ambient Temperature Range	5 to 35℃
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±0.1℃
External Input	External sensor port
Heating Power	6000W
Compressor Power	7360W
Cooling Power	32536W
Circulating Pump Power	280W
Power Consumption	14000W
Power Supply	380V/50Hz
Dimensions (W×D×H)	830×1356×1137 mm
Weight	327 Kg

Features

Liquid level display

Digital control panel

Pressure gauges

PT100 sensor 

Brazed plate exchanger

Safety protection system

Bath fluid ports

FAQs

1. What is the main function of this Thermal Circulator?

It is a professional laboratory instrument designed for Thermal Circulator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Thermal Circulator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Thermal Circulator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Thermal Circulator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Thermal Circulator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.