Electric Heating Incubator T-EI-S2100

Introduction

Electric Heating Incubator features 65 litres capacity. Its BRIGHT I control system enables efficient temperature and time regulation. It includes countdown reservation function for scheduling incubation start time in advance. Its double over-temperature alarm ensures safety through sensor control and independent temperature switch. Electric Heating Incubator is suitable for microbiology, cell culture, medical labs and pharmaceutical research.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Electric Heating Incubator is widely utilized in microbiology, cell culture, pharmaceutical research, food and beverage industry, environmental monitoring, etc.

Specifications

Volume	65 L
Temperature Range	Room temperature +5 to 100 °C
Temperature Fluctuation at 37°C	±0.3 °C
Temperature Uniformity at 37°C	±0.8 °C
Heating-up Time to 60°C	16 min
Recovery Time (after 30 Seconds door open at 60°C)	14 min
Number of Shelves	2 (Standard) 5 (Maximum)
Countdown Time	99 hours and 59 minutes
Program settings	10 segments, 100 cycles
Power Consumption	500 W
Internal Dimension	410 × 350 × 450 mm
External Dimension	555 × 566 × 722 mm
Net Weight	46 kg
Gross Weight	64 kg

Features

LCD display

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

6-stage speed regulation

Preheating chamber

Double door design

Glass inner door

RS-485 connectivity

FAQs

1. What is the main function of this Electric Heating Incubator?

It is a professional laboratory instrument designed for Electric Heating Incubator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Electric Heating Incubator compared to similar products?

It offers precise environmental control, effective contamination prevention measures, and intuitive operation interface. The uniform temperature and gas distribution inside the chamber ensure consistent culture results for sensitive biological samples.

3. What regular maintenance is required for this Electric Heating Incubator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Electric Heating Incubator?

Installation should meet: 1) Placing the instrument in a well-ventilated area with at least 10cm clearance around the sides and back for heat dissipation; 2) Ensuring a stable, level surface capable of supporting the instrument's weight; 3) Connecting to a dedicated power supply with appropriate voltage and grounding to prevent electrical issues; 4) Avoiding direct sunlight, heat sources, and areas with high humidity or dust.

5. What should I do if the Electric Heating Incubator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.