Phosphate Analyzer T-PAR-102

Introduction

Phosphate Analyzer is designed to accommodate a wide range of concentration levels within an ambient temperature range of 5 to 45℃. analyzer is equipped with a durable monochromatic cold light source providing stable illumination for accurate analysis. It is a single channel unit capable of precisely identifying and quantifying minute concentrations of the target substance. With graphic display, it provides a clear visual representation of results for easy interpretation.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Phosphate Analyzer is used to measure the concentration of phosphate ions in a solution. It is employed in various fields such as environmental monitoring, water treatment, agriculture, and industrial processes.

Specifications

No. of Channels	1
Measuring Ranges Available	0 to 2000ug/l, 0 to 10mg/l, 0 to 20mg/l, 0 to 50mg/l
Accuracy	±1% F.S
Repeatability	±1% F.S
Stability	≤±1% F.S / 24 h
Response Time	Initial response 4 minutes, 6 minutes at least for 98%
Message Cycle	About 4 minutes / channel
Sample Flow Rate	>100 ml / min
Sample Temperature	10 to 45℃
Sample Pressure	10 kPa to 100 kPa
Ambient Temperature	5 to 45℃
Humidity
Chemicals Dosage	3L / month
Current Output	4 to 20mA or 0 to 10mA can choose
Alarm Output	Relay（220V/1A）
Communication	RS-485, LAN, WiFi or 4G are optional
Power Consumption	≈50VA
Power Supply	AC220V±10% 50
Install Size	665mm × 405mm
Dimensions (H × W × D)	720mm × 460mm × 300mm
Packaging Weight	30kg

Features

Automated chemical reactions for increased efficiency
Colour touch LCD for visual data presentation
Records historical curves for 30 days
Allows remote monitoring and control
Offers low maintenance
Includes calibration for accuracy
Historical data query function

Standard Accessories

FAQs

1. What is the main function of this Phosphate Analyzer?

It is a professional laboratory instrument designed for Phosphate Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Phosphate Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Phosphate Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Phosphate Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Phosphate Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.