Introduction
Multi Gas Analyzer operates within a temperature range of -40 to 70 °C with a 500 ml/min pump flow, ensuring accurate monitoring of toxic and combustible gases. It supports detection of up to 12 gases simultaneously, suitable for diverse applications. The analyzer is equipped with multi-layer filtration to protect sensors. gas analyzer features a 3.5-inch HD LCD, providing clear visualization of real-time data and operational status.
Applications
Multi Gas Analyzer used for real-time monitoring of toxic, combustible, and hazardous gases to ensure safety and compliance. It is widely applied in industrial plants, laboratories, environmental monitoring, and high-risk work environments.
Specifications
| Gas detection | H2S, CO, O2, SO2, CO2, CL2, NH3, NO2, O3, HCN, VOCs, LEL |
| Detection Principle | Electrochemistry: H2S, CO, O2, SO2, CL2, NH3, NO2, O3, HCN Infrared ray: CO2 PID: VOCs Catalytic: LEL |
| Measuring range | H2S: 0 to 100 ppm CO: 0 to 1000 ppm O2: 0 to 30% VOL SO2: 0 to 50 ppm CO2: 0 to 5000 ppm CL2: 0 to 10 ppm NH3: 0 to 100 ppm NO2: 0 to 50 ppm O3: 0 to 10 ppm HCN: 0 to 10 ppm VOCs: 0 to 100 ppm LEL:0 to 100% LEL |
| Resolution | CO2, CO: 1 Ppm O2: 0.01% VOL LEL: 1% LEL H2S, SO2, CL2, NH3, NO2, O3, HCN, VOCs: 0.1 ppm |
| Precision | ≤±2%F.S |
| Pump flow rate | 500 ml/min |
| Working Temperature Range | -40 to 70 °C (Optional sampling machine for up to 1200℃) |
| Humidity Range | 0 to 95% RH |
| Display | 3.5-inch HD LCD Resolution: 320 × 480 |
| IP Grade | IP66 |
| Explosion-Proof Protection Class | Ex ia IIC T4 Ga |
| Alarm system | Buzzer, Red LED, alarm status on display, fault alarm, low battery alarm |
| Language | Chinese / English |
| Network Frequency | 2.4G high frequency wireless |
| Data storage | Independent SD memory card, standard 32G (Automatic recording with customizable time intervals) |
| Wireless Transmission Distance | Bluetooth: ≤10 m Wi-Fi outdoor: ≤500 m (single point) |
| Battery | 5200mAh rechargeable lithium battery, lasts 32h (single gas) and 24h (six gases) |
| Charger | Standard Micro-USB charging port, 9V/2A charger |
| Dimension (H × W × D) | 260 × 230 × 120 mm |
| Net Weight | 3.7 kg (3700 g) |
Features
Multi-gas detection
Electrochemical sensors
Infrared CO₂ sensor
Multi-display mode
Buzzer & LED alarm
Low battery alert
Wireless data transmission
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
