Introduction
Hydrogen Sulfide Detector features a micro-sampling pump with 10 suction grades for accurate hydrogen sulfide detection. It has an LCD dot matrix display for clear and easy monitoring of parameters. This unit allows rapid switching between gas concentration units for operational efficiency. hydrogen sulfide detector utilizes a high-precision sensor for accurate and reliable measurements.
Applications
Hydrogen Sulfide Detector identifies and measures the concentration of hydrogen sulfide (H₂S) gas in the air to ensure safety in hazardous environments and is utilized in oil refineries, sewage treatment plants, and chemical manufacturing facilities.
Specifications
| Gas Detected | Hydrogen Sulfide (H₂S) |
| Detection Principle | Electrochemistry |
| Measurement Range | 0 to 100 ppm |
| Resolution | 0.01 ppm |
| Precision | 1 to 2% F.S. |
| Response Time | ≤ 10 seconds |
| Recovery Time | ≤ 10 seconds |
| Repeatability | ≤ ±1% |
| Linearity Error | ≤ ±1% |
| Zero Shift | ≤ ±1% (F.S/year) |
| Sampling Method | Pumping suction |
| Sampling Flow Rate | 1 L/min |
| Suction Grades | 10 selectable grades |
| Operating Temperature Range | - 20℃ to 50℃ |
| Humidity Range | 0 to 95% RH |
| Explosion-Proof Rating | Ex ia II CT4 |
| Degree of Protection | IP66 |
| Alarm Mode | Sound, Light, Vibration |
| Gas Unit | ppm, mg/m³ |
| Operating Time | 12 hours |
| Power Supply | 3.7V, 2200mah |
| Dimensions | 205 × 75 × 32 mm |
| Weight | 300 g |
Features
Includes self-calibration
One-press factory reset function
Rechargeable lithium polymer battery
Integrated sound and light alarm system
Built-in temperature and pressure adjustment
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
