Introduction
Decanting low speed centrifuge is a microcomputer controlled unit with nine ascending and descending rate selection modes. It is available in chest and upright type. It consists of an LCD display and the safety and reliability of the unit increases due to its double lock rod design doors with magnetic locks. The parameters can be changed anytime during the operation without any downtime.
Applications
Used in waste water treatment, oil industries, chemical industries and food processing industries.
Specifications
| Type | Chest |
| Max speed | 4000 rpm |
| Max RCF | 3184 x g |
| Rotor capacity | 124 x Vacuum blood tubes |
| Speed accuracy | ± 10 rpm |
| Noise | ≤ 55 dB |
| Time range (hh : mm :ss) | 1 ̴ 99 : 99 :59 |
| Power | AC 220 V , 50 Hz |
| Dimensions | 580 x 740 x 520 mm |
| Weight | 90 kg |
Features
Microcomputer controlled system
AC frequency conversion motor drive
Offers nine ascending and descending rate selection mode
Offers ten different kinds of working mode selection
Speed/ centrifugal force can be set and double synchronous display screen
Door with double lock rod design, magnetic locks and electric door
Unique design of air exhaust temperature and low noise
FAQ
Q1: What is the maximum rotational speed of this centrifuge?
A1: The maximum speed is 4000 RPM (varies by model), such as 15000 RPM for high-speed models and 4000 RPM for low-speed models.
Q2: Does it have a refrigeration function?
A2: No, it is a non-refrigerated centrifuge - Refrigerated models can maintain a temperature range of -20°C to 40°C, while non-refrigerated models operate at ambient temperature.
Q3: What is the maximum capacity of the rotor?
A3: The standard rotor can hold 24×10ml test tubes (e.g., 12×15ml test tubes), and optional rotors are available for different tube sizes.
Q4: How to ensure the safety of centrifugation operation?
A4: It is equipped with multiple safety protections, including imbalance detection, door lock protection, and over-temperature/over-speed protection.
Q5: What is the recommended maintenance cycle?
A5: It is recommended to clean the rotor and chamber after each use, and perform a comprehensive maintenance check every 6 months (or 500 operating hours).
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
