Low Speed Centrifuge T-S215LSC

Introduction

Low Speed Centrifuge operates at a maximum speed of 5000 rpm and generates a maximum RCF of 4650 × g. It features customizable acceleration and deceleration rates to preserve sample integrity. The centrifuge has an LED touchscreen for easy data monitoring and precise control. Additionally, it supports up to five programmable stages, improving the efficiency of multi-step protocols.

Applications

Low Speed Centrifuge is used for precise sample separation in clinical, research, diagnostic labs, as well as in biotech, pharmaceutical, and university settings.

Specifications

Features

High-speed centrifugation

Variable frequency motor

Programmable operation

Motorized electronic lid lock

User-friendly interface

Stainless steel chamber

FAQ

Q1: What is the maximum rotational speed of this centrifuge?
A1: The maximum speed is 4000 RPM (varies by model), such as 15000 RPM for high-speed models and 4000 RPM for low-speed models.

Q2: Does it have a refrigeration function?
A2: No, it is a non-refrigerated centrifuge - Refrigerated models can maintain a temperature range of -20°C to 40°C, while non-refrigerated models operate at ambient temperature.

Q3: What is the maximum capacity of the rotor?
A3: The standard rotor can hold 24×10ml test tubes (e.g., 12×15ml test tubes), and optional rotors are available for different tube sizes.

Q4: How to ensure the safety of centrifugation operation?
A4: It is equipped with multiple safety protections, including imbalance detection, door lock protection, and over-temperature/over-speed protection.

Q5: What is the recommended maintenance cycle?
A5: It is recommended to clean the rotor and chamber after each use, and perform a comprehensive maintenance check every 6 months (or 500 operating hours).