Introduction
Flow Cytometer detects cellular particles from 0.2 μm to 60 μm for a thorough analysis of various cell types and sizes. unit is equipped with lasers emitting light at wavelengths of 488nm and 638nm for multiparameter analysis. Operates at a rapid rate of 45,000 events per second and can analyze 96-well plates within 30 minutes. Enhanced with an Avalanche Photodiode Detector (APD) for precise and accurate detection.
Applications
Flow Cytometer is widely used in immunophenotyping, cell cycle analysis, drug discovery, and hematology.
Specifications
| Wavelength | 488nm, 638nm |
| Laser | Semiconductor laser |
| Laser Power | 488 nm & 638 nm laser: 20mW 40/60mW (Optional) |
| Fluorescence Channels | 6 |
| Filters Configuration | 488nm laser: 530/30 nm BP FITC, 585/42 nm BP PE, 700 BP Per CP/ PE-Cy 5, 785/55 nm BP PE-Cy7 638nm laser: 660/20 nm BP APC, 785/55 nm BP APC-Cy7 |
| Optics | The excitation and receiving of solid spatial separation. No fiber conduction. Fixed optical path. |
| Sensitivity of Fluorescence | FITC < 75 MESF PE < 55 MESF APC < 55 MESF |
| FSC Sensitivity | 0.5 μm |
| SSC Sensitivity | 0.2 μm |
| Range of Particles | 0.2 μm to 60 μm |
| Linear | ≥ 0.98 |
| Resolution | CV ≤2% |
| Carry-Over | ≤ 0.1% |
| Detector | Avalanche Photodiode Detector(APD) |
| Speed | 45,000 events/s; 96 - well plates/30min |
| Minimum Sample Volume | 10μL |
| Speed of Sample | 15 to 235 μL/Min |
| Absolute Count | Volumetric method: Microspheres method |
| Preheating Time | <4min |
| Blending Mode | Whole plate; single pipe; interval mixing is set freely |
| Tube Numbers of Loader | 40 tubes and 96 holes |
| Type of Tube | Standard flow pipe（12 × 75mm, 5ml) 96 - well plates(F,U,V type) Centrifugal tube (1.5ml, 2ml) |
| Capacity of Liquid Bottle | Waste liquid barrel 6L,Sheath liquid drum 6L,Cleaning liquid drum 1L |
| Maintenance System | Liquid path maintenance automation |
| Software | Software has an edition in English and Chinese With the function of automatic quality control detection, the software can draw the Levey-Jennings curve automatically Support to be connected with clinical LIS software, to facilitate data graphic transmission |
| Feature of Software | Automatic saving mode against power failure Detection and analysis can run at the same time |
| Compensation | Compensation Matrix List Quick Compensation Auto Compensation Auto Compensation Calculation |
| FCS Format | FCS 3.0 |
| Operational Environment | 10 °C to 35 °C, 15 to 80 % RH |
| Computer Operating System | Win10 pro |
| Voltage | 220 V, 50Hz |
| Dimension (W × D × H ) | The host system: 44 × 43.5 × 52 cm The host system with leader: 57.2 × 53.3 ×52 cm Liquid tray: 44 × 32 × 45 cm |
| Liquid Tray Weight | 7 Kg |
| Host System Weight | 32 Kg |
| Host System with Leader Weight | 38 Kg |
Features
Simultaneous detection and analysis capability
Supports Clinical LIS integration
Liquid pathway automation for efficiency
Offers multiple CD Markers
Autonomous power-failure saving mode
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
