Introduction
Low speed refrigerated centrifuge is a microcomputer controlled unit with a speed of 4500 rpm. It is equipped with digitalized LED panel for observing and regulating ongoing parameters such as speed, time and temperature. The parameters can be changed anytime during the operation without any downtime. It consists of an LCD display and the safety and reliability of the unit increases due to its double lock rod design doors with magnetic locks.
Applications
Used for a wide range of biomedical analysis, immunoenzyme analysis, microplate processing and cell culture applications.
Specifications
| Type | Benchtop |
| Max speed | 4500 rpm |
| Max RCF | 3524 x g |
| Swing rotor capacity | 4 x 300 ml |
| Speed accuracy | ± 10 rpm |
| Temperature range | -20 °C to -40 °C |
| Temperature accuracy | ± 2 °C |
| Noise | ≤ 56 dB |
| Timer range (hh:mm:ss) | 1 min ~ 99:99:59 |
| Power supply | AC 220 V 50 Hz |
| Power | 1500 W |
| Dimensions | 680 x 710 x 525 mm |
| Weight | 80 kg |
Features
Microcomputer controlled system
AC frequency conversion motor drive
Offers nine ascending and descending rate selection modes
Offers ten different kinds of custom work mode selection
Speed/ centrifugal force can be set and double synchronous display screen
Door with double lock rod design, magnetic locks and electric door
Full steel structure with stainless steel centrifugal cavity
Up to 30 grams stress tolerance with no special load balancing
FAQ
Q1: What is the maximum rotational speed of this centrifuge?
A1: The maximum speed is 4000 RPM (varies by model), such as 15000 RPM for high-speed models and 4000 RPM for low-speed models.
Q2: Does it have a refrigeration function?
A2: Yes, it is a refrigerated centrifuge - Refrigerated models can maintain a temperature range of -20°C to 40°C, while non-refrigerated models operate at ambient temperature.
Q3: What is the maximum capacity of the rotor?
A3: The standard rotor can hold 24×10ml test tubes (e.g., 12×15ml test tubes), and optional rotors are available for different tube sizes.
Q4: How to ensure the safety of centrifugation operation?
A4: It is equipped with multiple safety protections, including imbalance detection, door lock protection, and over-temperature/over-speed protection.
Q5: What is the recommended maintenance cycle?
A5: It is recommended to clean the rotor and chamber after each use, and perform a comprehensive maintenance check every 6 months (or 500 operating hours).
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
