CO2 Incubator CO2032

Introduction

CO2 Incubator features a forced convection system with a spacious 160-liter chamber capacity. Equipped with a temperature range of 5 to 55℃ and a six-chamber surface heating system. Incorporated with a heated glass door to prevent condensation and maintain stable conditions. Built-inn precise CO2 infrared sensor ensures high stability and measurement accuracy. Our CO2 Incubator is designed for cell culture, microbiology, and pharmaceutical applications.

Applications

CO2 Incubator is designed for cell culture, microbiology, pathology and life science research. Suitable for tissue culture, incubation of cultures, and laboratory experiments.

Specifications

Convection Mode	Forced Convection
Capacity	160 L
Temperature Range	RT+5℃ to 55℃
Temperature Accuracy	0.1
Temperature Fluctuation	±0.5
Temperature Uniformity	±0.8℃
CO2 Range	0 to 20%
CO2 Sensor Uniformity	IR Sensor (±0.1%)
CO2 Recovery Without Overshoot	≤ 2 Minutes
Temperature Recovery Without Overshoot	≤ 8 Minutes
Humidification Method	Humidity Pan > 95% (With Temperature Display)
Ambient Temperature	10 to 30℃
Humidity	<70%
Insulation Material	Environmental Protection Type Material
Interior Material	SUS304 Stainless Steel
No. of Shelves	3
Power Consumption	650W
Power Supply	Single Phase AC220V/50Hz
Internal Dimension (H×W×D)	650×460×540 mm
External Dimension (H×W×D)	905×610×687 mm
Packing Dimension (H×W×D)	1030×690×695 mm
Net Weight	55 kg

Features

Zero vibration.

UV sterilization lamp.

CO2 inlet valve with a filter device.

Adaptive PID controller.

Programmable ALLSENS TM software.

Intuitive user interface.

PT100 sensor.

Over-temperature protection.

Audible and visual alarm.

Anti-pressure protection.

Reduced risk of contamination.

FAQs

1. What is a CO? incubator?

A CO? incubator is a laboratory device used to grow and maintain cell cultures by providing a controlled environment with the right temperature, humidity, and carbon dioxide (CO?) levels.

2. What is it used for?

CO2 incubator is used to grow cells, tissues, or embryos for research or medical use.

3. Is it safe to touch inside the incubator?

Yes, but always use clean gloves and be gentle with the sensors and walls.

4. What are the main features of a CO? incubator?

Main features of CO2 incubator includesc controlled temperature, adjustable CO? levels, high humidity to prevent sample drying and sterile interior to avoid contamination.

5. What are the applications of CO2 incubator?

It is designed for cell biology, cancer research, IVF procedures and pharmaceutical testing.