Spray cabinet

Introduction

A spray cabinet is a controlled-environment test cabinet used to test the products by the spraying of the water or the other liquids, and it is used in the automotive, the electronics, the defense, and the many other industries for the testing of the water resistance and the ingress protection of the products. The spray cabinet consists of an enclosure, a water supply and a spray system with the nozzles, a water circulation and a drainage system, and a control system, and it sprays the test article with the water at a controlled intensity, the drop size, and the angle, simulating the rain, the spray, and the splash conditions, and it is used for the testing of the ingress protection of the products, such as the IPX3 and the IPX4 ratings, for the testing of the water resistance of the seals and the enclosures, for the testing of the performance of the products in the spray, and for many other applications, following the standard test methods, such as the IEC 60529; the spray cabinet provides a controlled and a reproducible test, with features such as the adjustable spray parameters and the observation window, and it is available in various sizes, from the small cabinets for the components to the large cabinets for the larger products; the spray cabinet is an essential equipment for the environmental testing. Spray cabinets are used in the automotive industry, in the electronics industry, in the defense industry, in the construction, and for many other applications. With their water spray, spray cabinets are essential for the water resistance testing.

Table Water-T20urtain Spray Cabinet LTWS-T2010

Table Water-curtain Spray Cabinet offers an exhaust air rate of 12m/s for efficient removal of overspray and maintaining a clean working environment. The instrument has a centrifugal exh...

Send Inquiry View more

Standards

ISO 14917:2017-Thermal spraying-Terminology, classification

Complies with the above standards, but is not limited to them.

Features

1. Spray cabinet for ventilated spray painting and coating with overspray filtration and operator protection.

2. Enclosed spray booth with exhaust filtration system for controlled spray application of paints and coatings.

3. Suitable for small industrial, hobby, crafts, model making, educational, laboratory and prototyping use.

4. Includes cabinet body, exhaust fan, filters, lighting, work surface and operation manual.

5. Supports spray painting of parts, models, samples and prototypes with aerosol or spray gun in ventilated enclosure.

FAQ

Q1: What testing scenarios is this cabinet mainly applied to?

A: The spray cabinet (spray booth) is used in small industrial finishing, hobby and model making, crafts, educational labs, research and development, and prototyping to provide a ventilated enclosed workspace for spray painting and coating, capturing paint overspray and fumes through filtration/exhaust to protect the operator and surrounding environment. It supports small parts painting (metal, plastic, wood, ceramic parts - spray finishing), model making (scale models, miniatures, RC models - airbrush/spray painting), crafts and DIY (artwork, custom painting, furniture components), small industrial/prototyping (sample spraying, color matching, coating trials, small batch finishing), educational (art/design schools, technical training), and laboratory (coating test samples, experimental paint application). Similar to water curtain cabinet but may use dry filtration (fiberglass/paint arrest filters) instead of water, or a combination. The cabinet pulls air through the work area, filters paint particles, and exhausts (ducted outside or recirculated with HEPA/Carbon).

Q2: What standards does the cabinet comply with?

A: The spray cabinet follows relevant NFPA 33 (spray application of flammable/combustible materials), OSHA 29 CFR 1910.94 (ventilation for spray finishing), EN/CE standards, and GB/T standards for spray booths. For solvent-based paints, explosion-proof electrical components required (ATEX/IECEx, OSHA Class I). Calibration includes exhaust airflow measurement. Follow local occupational safety and hazardous waste regulations.

Q3: What is the warranty period for the whole cabinet and key components?

A: The whole spray cabinet is covered by a 12-month warranty. The cabinet body, exhaust fan, filters, and lighting are covered, while filters (replaceable - paint arrest filters, HEPA, carbon), fan (wear), bulbs, and seals are consumables/accessories. Damage from improper use, clogged filters (reduced airflow, fan strain), lack of maintenance, using non-explosion-proof with solvents (fire hazard), or unauthorized repair is excluded. Extended warranty may be available. Fans last 3-8 years; filters need regular replacement.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires basic spray painting and safety training. We provide manuals. Proper setup (stable bench, exhaust ducting to outside (or recirculating with proper filtration), power (explosion-proof if solvents), verify airflow before use), sample prep (thin paint, prepare parts, PPE (respirator, glasses, gloves)), operation (turn on fan BEFORE spraying, spray inside cabinet, avoid over-spraying outside opening), post-operation (leave fan running to clear fumes, clean parts), maintenance (regular filter replacement (when clogged/reduced airflow - paint arrest filters are disposable; HEPA/Carbon per schedule), clean cabinet interior (remove paint buildup), inspect fan (clean blades, verify airflow), troubleshooting (poor capture (clogged filters, weak fan, wrong technique - replace filters, service fan, improve technique), excessive fumes (inadequate exhaust, solvent paint without proper ventilation, filters clogged - increase ventilation, wear respirator, replace filters), fan failing (clogged, worn, electrical - clean, service), and safety (FIRE/EXPLOSION (solvent-based paints - explosion-proof electrical, proper ventilation, no ignition sources, grounding, fire extinguisher), INHALATION (paint particles/solvent vapors - respirator (organic vapor for solvents, P100 for particulates), exhaust to outside), SKIN/EYE (gloves, glasses, protective clothing), HAZARDOUS WASTE (used filters, paint residue - dispose per regulations), NOISE (hearing protection if needed), electrical (grounding, GFCI)) are critical for safe use.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Exhaust airflow verification every 3-6 months with anemometer (face velocity 0.5-1.0 m/s per NFPA/OSHA; if low, replace filters/service fan). Filter replacement based on pressure drop or visual (typically 1-3 months). Fan maintenance annually. For occupational safety, follow local regulations and maintain records. Explosion-proof electrical inspection annually if solvent-based.

Q7: Are supporting consumables universal?

A: Filters (paint arrest (fiberglass, cardboard), HEPA, activated carbon - specific to cabinet size/model), fan (replacement - specific), bulbs (standard or specific), respirator cartridges (standard), spray gun (user-supplied or optional), cleaning supplies, and hazardous waste containers are available from industrial/safety supply, though filters and fans are cabinet-specific. Long-term cost includes filters (regular) and waste disposal.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes size (small benchtop to medium), explosion-proof rating (standard for water-based, explosion-proof for solvent-based), filtration (dry paint arrest only, arrest + HEPA, arrest + HEPA + Carbon (for VOCs)), exhaust (ducted outside or recirculating), features (turntable, LED lighting, airflow monitor, timer), construction (stainless steel, galvanized, powder-coated), accessories (extra filters, spray gun, respirator, ducting, fire extinguisher), certifications (CE, NFPA/OSHA, ATEX). Additional accessories can be ordered separately.

Q9: Does the purchase include on-site installation and commissioning service?

A: Standard delivery includes spray cabinet, fan, filters, light, power cord, and manual. On-site installation (ducting, electrical) and safety training not included but recommended (especially explosion-proof models). Self-installation feasible for basic models but verify airflow and safety before use.

Q10: What types of samples are compatible with this equipment?

A: The spray cabinet is for spray painting small parts: metal, plastic, wood, ceramic parts, models/miniatures, crafts, artwork, prototypes, and experimental coatings. Paint types: water-based (acrylic, latex - lower risk), solvent-based (enamel, lacquer, urethane, automotive - REQUIRES explosion-proof and proper ventilation/respirator), aerosols, airbrush paints. NOT compatible with: large parts (use full-size booth), powder coating (different equipment), high-volume production (industrial booth), extremely toxic/radioactive materials (specialized containment), and spraying without exhaust/PPE. The spray cabinet (dry filter) differs from water curtain: dry filters capture paint particles on fiberglass/cardboard pads (disposable), while water curtain uses water to wash particles into sump. Dry filter is simpler (no water/pump, less maintenance) but filters need frequent replacement and can be less effective for heavy overspray; water curtain handles heavier overspray and is easier to clean (sludge removal) but requires water management and pump maintenance. Both require proper ventilation and PPE for solvent-based paints.