Introduction
A CO2 shaking incubator is a laboratory instrument that provides a controlled environment of the temperature, the CO2 concentration, and the humidity, with a shaking function, for the cultivation of cells and microorganisms, and it is used in cell biology, microbiology, and biotechnology laboratories for the cell culture and the fermentation. The CO2 shaking incubator maintains the temperature, typically at 37 degrees Celsius for the mammalian cells, the CO2 concentration, typically 5%, to maintain the pH of the culture medium, and the humidity, to prevent the evaporation, and it provides a shaking motion that agitates the cultures in the flasks and the tubes, improving the aeration and the mixing; the incubator consists of an insulated chamber, a heating and a cooling system, a CO2 supply and control system, a humidity control system, a shaking platform with a motor, a temperature, CO2, and humidity sensor, and a display and a control system, and it provides a precise control of the environment, with features such as an alarm, a door heater, and a data logging; the CO2 shaking incubator is used for the cultivation of the mammalian cells, for the culture of the bacteria and the yeast, for the expression of the proteins, for the fermentation, and for many other applications, and it is available in various sizes, from small benchtop models to large floor-standing models. CO2 shaking incubators are used in cell biology and biotechnology laboratories, in the pharmaceutical industry, in the research institutions, and for many other applications. With their controlled environment, CO2 shaking incubators are essential for cell culture.
CO2 Shaking Incubator LCSI-T2010
CO2 Shaking Incubator supports adjustable temperature range from -15℃ to 60℃. Ensures continuous operation with leakage protection and a secondary mechanical thermostat. Equipped with ...
CO2 Shaking Incubator LCSI-T2010
CO2 Shaking Incubator supports 40 to 300 rpm shaking speed with ±1 rpm control precision. Temperature deviations trigger alarm system and automatic heating shutdown. Equipped with fast ...
CO2 Shaking Incubator LCSI-T2020
CO2 Shaking Incubator with 160L capacity with 2 to 300 rpm orbital motion and 4 to 60°C precision-controlled environment ensures stable operational performance. Integrated UV sterilizat...
CO2 Shaking Incubator LCSI-T2011
CO2 Shaking Incubator features shaking speed of 40 to 300 rpm, with ±1 rpm control precision. Durable powder-coated steel housing with polished stainless steel interior chamber. Auto-st...
CO2 Shaking Incubator LCSI-T2010
CO₂ Shaking Incubator maintains CO₂ level up to 20%, ensuring ideal conditions for cell cultures. Its Double-layer glass door enables clear observation without disturbing inner environ...
CO₂ Shaking Incubator LCSI-T2011
CO₂ Shaking Incubator operates with adjustable speeds ranging from 10 to 300 rpm for optimal performance. Equipped with microprocessor control system for stable temperature regulation s...
Standards
ISO/TS 23565:2021-Biotechnology-Bioprocessing-General requirements and considerations for equipment used in the manufacturing of cells for therapeutic uses
Complies with the above standards, but is not limited to them.
Features
1. CO2 shaking incubator for cell culture with agitation.
2. Incubator combining CO2 control, temperature and shaking.
3. For suspension culture, expression and cell-based work.
4. Includes incubator, platform, sensors, controls and manual.
5. Maintains CO2 and temperature while shaking cultures.
FAQ
Q1: What scenarios is this incubator used for?
A: It grows suspension cells or cultures requiring agitation under controlled CO2, temperature and humidity, supporting expression and cell culture work with a shaking platform.
Q2: What standards does it comply with?
A: It follows IEC 61010, IEC 61326 and related GB/T standards, with CO2, temperature and uniformity verified. The relevant parameters are verified during final inspection before shipment, and compliance documentation or test reports can be provided on request for your quality records.
Q3: What is the warranty?
A: The incubator carries a 12 to 24 month warranty covering controls and drive. Filters and platforms are wear parts. Damage from spills or unauthorized repair is excluded.
Q4: Is it hard to operate?
A: Operation requires trained cell culture staff for setup and contamination control. We provide a manual, installation and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.
Q7: Are consumables universal?
A: Filters are model-specific, while media is standard. Ongoing cost includes filters and platform parts.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include platform size, flask clamps, CO2 range, data logging and sterilization features. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: Standard delivery includes the incubator and manual. On-site installation, calibration and training are typically included or recommended.
Q10: What cultures are compatible?
A: It handles suspension and agitated cell cultures within load. It is not for static adherent-only needs without appropriate vessels, microbial fermentation, or samples beyond capacity.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.