Uv water sterilizer

Introduction

A UV water sterilizer is a device that uses ultraviolet (UV) light to disinfect water by inactivating microorganisms, such as bacteria, viruses, and protozoa, and it is used for the disinfection of drinking water, process water, wastewater, and water in many other applications. The UV sterilizer consists of a chamber containing one or more UV lamps, typically low-pressure mercury lamps that emit UV-C light at a wavelength of about 254 nm, and a quartz sleeve that protects the lamps and allows the UV light to pass; in operation, the water flows through the chamber, and the UV light passes through the water, and the UV-C radiation damages the DNA of the microorganisms, preventing them from reproducing, and inactivating them; the UV sterilizer provides a chemical-free disinfection, with no by-products, and it is effective against a wide range of microorganisms, and it does not change the taste or the odor of the water, and it is used with proper flow rate and UV dose, and it may include a UV intensity monitor and a flow switch; the UV sterilizer is available in various sizes, from small units for point-of-use treatment to large units for municipal and industrial treatment. UV water sterilizers are used for the disinfection of drinking water in homes, businesses, and communities, for the treatment of process water in the food, beverage, and pharmaceutical industries, for the disinfection of wastewater, for aquariums and ponds, for swimming pools, and for many other applications. With their effective disinfection, UV water sterilizers are essential for water treatment.

UV Water Sterilizer LAWS-T2010

UV Water Sterilizer offers a water treatment flow rate of 90 m³/hour. Enhanced with rate of up to 99.9%. Effective against a diverse range of bacteria, viruses, and algae. This steriliz...

Send Inquiry View more

Standards

IEC 61010-2-040:2020-Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

ISO 17665-1:2006-Sterilization of health-care products-Moist heat-Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices

Complies with the above standards, but is not limited to them.

Features

1. UV water sterilizer for disinfecting water with UV light.

2. Flow-through UV disinfection unit with lamp and reactor.

3. For water treatment and point-of-use disinfection.

4. Includes sterilizer, lamp, quartz sleeve and manual.

5. Inactivates microorganisms without chemicals.

FAQ

Q1: What scenarios is this sterilizer used for?

A: It disinfects water as it flows past a UV lamp, inactivating microorganisms without added chemicals for point-of-use or treatment systems.

Q2: What standards does it comply with?

A: It follows USEPA UV disinfection guidance, NSF-related and electrical safety standards and GB/T standards, with UV dose verified.

Q3: What is the warranty?

A: The unit carries a 12 to 24 month warranty covering the reactor and controls. Lamps and sleeves are wear parts. Damage from misuse is excluded.

Q4: Is it hard to operate?

A: Operation is simple after installation: water flows and the lamp runs, with periodic lamp replacement. We provide a manual and guidance.

Q5: What is the lead time?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is calibration required?

A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.

Q7: Are consumables universal?

A: Lamps and sleeves are model-specific, while pre-filters are standard. Ongoing cost includes lamps.

Q8: Can it be customized?

A: Yes, several configurations are available. Options include flow rate, dose, materials and intensity monitors. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.

Q9: Is installation included?

A: The instrument does not need professional installation. After unpacking, connect it to the specified power supply, allow it to stabilize and confirm the self-check passes. The package includes a printed manual, and our support team offers remote assistance throughout setup.

Q10: What water is compatible?

A: It handles relatively clear water within flow and transmittance. It is not for highly turbid water without pretreatment, chemical contaminant removal, or flows beyond the rated dose.