Introduction
A glass bead sterilizer is a laboratory instrument used to rapidly sterilize small instruments, such as forceps, scissors, and other metal tools, by immersing them in a bath of heated glass beads, and it is used in microbiology, laboratories, and clinics for sterilizing instruments between uses. The sterilizer consists of an insulated chamber filled with small glass beads, a heating element that heats the beads to a high temperature, typically 250-300 degrees Celsius, and a temperature controller and display; in operation, the metal instrument is inserted into the hot beads, which transfer heat to the instrument and sterilize it by destroying the microorganisms on its surface, and the sterilization is rapid, typically requiring a few seconds of immersion, making it convenient for sterilizing instruments between samples; the glass bead sterilizer is suitable for metal instruments that can withstand the high temperature, and it is not suitable for plastic or heat-sensitive instruments, and it is used for inoculating loops, needles, and small dissecting tools. Glass bead sterilizers are used in microbiology laboratories for sterilizing inoculating loops and needles between cultures, in clinics and laboratories for sterilizing small instruments between procedures, in educational laboratories, in research, and in many other applications, and they are available in various sizes, with features such as precise temperature control, a digital display, and fast heating. With their rapid sterilization, glass bead sterilizers are convenient instruments for sterilizing small metal tools.
Glass Bead Sterilizer LGBS-T2013
Glass Bead Sterilizer operates at a temperature range of 100 to 300°C, ensuring efficient sterilization. The unit quickly heats up, reaching 300°C in just 25 minutes, making it ideal f...
Glass Bead Sterilizer LGBS-T2012
Glass Bead Sterilizer has a temperature range of 100 to 300°C, ensuring effective sterilization of various metal instruments. With a bead capacity of 150g and a temperature accuracy of ...
Glass Bead Sterilizer LGBS-T2011
Glass Bead Sterilizer is designed to operate within temperature ranges from 100 to 300℃. It features a capacity of 300 g accommodating various small surgical instruments for effective s...
Glass Bead Sterilizer LGBS-T2010
Glass Bead Sterilizer is reliable for sterilization of small surgical instruments using glass beads. Digital control with a temperature range of 100 ℃ to 300 ℃. Sterilizer does not req...
Standards
IEC 61010-2-040:2020-Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
ISO 17665-1:2006-Sterilization of health-care products-Moist heat-Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
Complies with the above standards, but is not limited to them.
Features
1. Glass bead sterilizer for rapid sterilization of small instruments using hot glass beads.
2. Dry heat sterilization at 210-250 degrees C using glass beads for instant sterilization.
3. Suitable for dental, medical, laboratory, beauty, veterinary and research facilities.
4. Includes heating chamber, glass beads, temperature controller, housing and manual.
5. Supports rapid sterilization of small instruments between patients/procedures.
FAQ
Q1: What testing scenarios is this sterilizer mainly applied to?
A: The glass bead sterilizer is used in dental clinics, medical facilities, clinical laboratories, beauty salons, veterinary clinics, research institutions and healthcare to rapidly sterilize small instruments (dental burs, endodontic files, probes, scissors, forceps) using hot glass beads at 210-250 degrees C for quick sterilization between patients or procedures. It supports dental clinic instrument sterilization (burs, files, explorers between patients), medical/surgical small instrument rapid sterilization, laboratory instrument sterilization (inoculation loops, small tools), beauty salon tool sterilization (tweezers, needles), veterinary clinic instrument sterilization, and research laboratory small tool sterilization. The glass bead sterilizer provides rapid (5-15 second) dry heat sterilization of small instrument tips, convenient for between-patient use where full autoclave cycles are impractical. IMPORTANT: This is NOT a substitute for full autoclave sterilization for critical instruments - it provides rapid surface sterilization of small instrument portions only.
Q2: What standards does the sterilizer comply with?
A: The glass bead sterilizer follows relevant ISO, ASTM and GB/T standards for sterilization equipment, including applicable dental/medical device regulations, and relevant GB/T standards for small sterilizers. The hardware complies with IEC 61010 safety standards and applicable hot surface safety standards. Sterilization efficacy should be verified per applicable standards (biological indicators may not be practical for glass bead - use chemical indicators or temperature verification). Users should note that glass bead sterilization is NOT recognized as a validated sterilization method for critical (surgical) instruments by many regulatory bodies (FDA, CDC) - it is intended for semi-critical or non-critical small instruments between uses, and full sterilization (autoclave) should still be performed at the end of the day or for critical instruments.
Q3: What is the warranty period for the whole sterilizer and key components?
A: The whole glass bead sterilizer is covered by a 12-month warranty. The heating chamber, heating element, temperature controller and housing are covered, while glass beads and fuses are consumables or accessories. Damage from improper use, overheating or unauthorized repair is excluded. Extended warranty may be available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation is simple: preheat to temperature (210-250 degrees C), insert instrument tip into glass beads for 5-15 seconds, remove and use. No professional training is required for basic use, but users should follow proper temperature setting, instrument insertion technique, hot surface safety and infection control procedures. We provide an operation manual and remote guidance. The sterilizer should be preheated for 15-20 minutes before use.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Temperature calibration against a reference thermometer recommended every 6-12 months for clinical use. Heating element condition checked. Glass bead replacement as needed (when contaminated or degraded). Routine cleaning of chamber. Full sterilizer performance verification annually. Temperature controller accuracy verified periodically.
Q7: Are supporting consumables universal?
A: Glass beads and fuses are available from general/dental suppliers. Long-term consumable cost is very low for a glass bead sterilizer. Replacement glass beads should be of appropriate size and heat-resistant quality.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes chamber size, temperature range, control type (analog, digital), bead type and accessories. Additional glass beads and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: No installation is required. The package includes the glass bead sterilizer, glass beads and instruction manual. On-site training is available at additional cost for dental/clinic setup.
Q10: What types of instruments are compatible with this equipment?
A: The glass bead sterilizer sterilizes small instruments including dental burs, endodontic files, explorers, probes, scissors tips, forceps tips, inoculation loops, needles and other small metal instruments within the instrument size, temperature tolerance and chamber specification. Only the portion of the instrument inserted into the glass beads is sterilized - instruments with plastic handles or non-heat-resistant parts should NOT be inserted (plastic will melt). Very large instruments cannot fit in the chamber. Users should understand the limitations: glass bead sterilization sterilizes only the inserted portion (typically the tip), does NOT sterilize instrument handles or non-inserted portions, is NOT a substitute for autoclave for critical (surgical) instruments, should be used for between-patient rapid sterilization of semi-critical/non-critical small instruments, full sterilization (autoclave) should be performed at the end of the day or for critical instruments, use only heat-resistant metal instruments (no plastic, no non-heat-resistant materials), preheat to proper temperature (210-250 degrees C - lower temperatures may not achieve sterilization), insert instrument for sufficient time (5-15 seconds depending on instrument size and temperature), avoid overloading (insert one instrument at a time), allow instrument to cool briefly before use (hot tip can burn tissue), keep the chamber covered when not in use (maintain temperature, prevent contamination), replace glass beads when contaminated or degraded (beads can accumulate debris), and follow proper infection control protocols per facility policy and regulatory requirements (CDC, ADA, WHO). The sterilizer should be placed on a heat-resistant, stable surface. The exterior can become hot - use caution. The sterilizer should not be left unattended while on. For dental use, follow ADA/CDC guidelines for instrument processing (glass bead sterilizer is classified as a rapid heat transfer method for semi-critical instruments, but full sterilization by autoclave is still required). Waste (used glass beads, debris) should be disposed of per applicable regulations. The sterilizer should be cleaned regularly (remove beads, wipe chamber, replace with clean beads). For clinical use, maintain proper documentation (temperature logs, maintenance records) per regulatory requirements.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.