Introduction
Glassware Washers are essential laboratory equipment designed to automate the washing and disinfection of objects like test tubes, beakers, and pipettes. They feature a spacious stainless-steel chamber with spray arms for efficient washing. Their programmable cycles allow for customized cleaning and drying processes. These systems utilize high pressure hot water to remove residues, pollutants and germs. Our Glassware Washers are vital in research, pharmaceutical and clinical laboratories for safe and sterile equipment preparation.
Automatic Glassware Washer GW2035
Automatic Glassware Washer features 170L cavity volume and up to 50°C to 93°C cleaning temperature. It provides unmatched flexibility, cleaning, and drying efficacy. Built-in drop-down ...
Automatic Glassware Washer GW2036
Automatic Glassware Washer has a 198L chamber volume operating at pump flow rate of 600L/min. It is engineered to provide superior flexibility, cleaning, and drying efficacy. Integrated d...
Automatic Glassware Washer GW2037
Automatic Glassware Washer has 198L cavity volume and up to 50°C to 93°C cleaning temperature. It is a front-loading washer disinfector designed to clean wide range of laboratory glassw...
Automatic Glassware Washer GW2034
Automatic Glassware Washer has 170L cavity volume with 50°C to 95°C cleaning temperature. It is engineered to provide unrivalled flexibility, cleaning, and drying efficacy. Integrated d...
Automatic Glassware Washer GW2031
Automatic Glassware Washer features 126L cavity volume and upto 50°C to 95°C cleaning temperature. It provides unmatched flexibility, cleaning, and drying efficacy. Built-in drop-down d...
Automatic Glassware Washer GW2033
Automatic Glassware Washer is a front-loading washer disinfector with 126L cavity volume. It is designed to provide unrivalled flexibility, cleaning, and drying efficacy. Integrated with ...
Automatic Glassware Washer GW2032
Automatic Glassware Washer has 206 L washing chamber, with upper and lower utensil heights of 170 mm and 265 mm. It is designed to be long-lasting, dependable, and energy-efficient. Equip...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Pre-set programs suit glassware, instruments and contaminated items.
2. Door and water safety devices protect users.
3. Drying and condensate functions improve turn-around.
4. Adjustable racks and baskets hold varied items.
5. Clear display shows cycle stage and temperature.
FAQ
What is the Glassware Washer mainly used for?
The Glassware Washer is used to wash and decontaminate glassware, instruments or parts automatically. It supports laboratories, healthcare, central services and production areas needing consistent, traceable cleaning.
Which standards and regulations apply to the Glassware Washer?
The unit is designed with reference to applicable washer-disinfector standards, IEC 61010 electrical safety and relevant GB/T methods. Cycles and detergents should follow validated procedures. Compliance documentation can be provided on request.
How long is the warranty period?
The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.
Will staff need special training?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Is calibration included?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are the consumables universal or proprietary?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can it be adapted to our requirements?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Do you provide on-site installation?
Most models can be commissioned by following the manual, including positioning, connections, checks and a first test run. Remote guidance is available during start-up. On-site installation, commissioning and training can be arranged separately where required.
What should be avoided when using the Glassware Washer?
Do not overload racks, block spray arms or wash incompatible items. Use the correct detergent and ensure drying. Follow the operating instructions.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.