Ozone tester

Introduction

An ozone tester is an instrument used to measure the concentration of ozone gas in air, water, or process streams, and it is used for monitoring ozone generation, for verifying ozone treatment effectiveness, and for safety and environmental monitoring. Ozone testers operate on various principles, including UV absorption, in which ozone absorbs ultraviolet light at a characteristic wavelength, such as 254 nm, and the concentration is calculated from the amount of light absorbed; electrochemical sensors, in which ozone reacts at an electrode and generates a current proportional to the concentration; and colorimetric methods, in which ozone reacts with a reagent to produce a color that is measured, and the choice of method depends on the concentration range, the matrix, and the application. Ozone testers are used in water treatment plants for monitoring the ozone dose in drinking water and wastewater disinfection; in the food industry for verifying ozone treatment of surfaces, produce, and process water; in semiconductor and electronics manufacturing for monitoring ozone in cleaning and oxidation processes; in swimming pools and spas for water treatment; in occupational safety for monitoring ozone in workplaces where it may be generated, such as near UV lamps, copiers, and electrical equipment; and in environmental monitoring for air quality assessment. They are available as portable handheld instruments, benchtop analyzers, and online monitors with continuous measurement and alarm functions. Features include high sensitivity, wide measurement ranges, and reliable calibration. With their importance in process control and safety, ozone testers are essential for ozone monitoring applications.

Handheld Ozone Tester LHOT-T2010

Handheld ozone tester is a microprocessor based unit suitable for ozone concentration detection in various industrial and special environments. It employs an electrochemical sensor and a...

Send Inquiry View more

Standards

ISO 13964:1998-Air quality-Determination of ozone in ambient air-Ultraviolet photometric method

ISO 10313:1993-Ambient air-Determination of the mass concentration of ozone-Chemiluminescence method

ISO 6143:2001-Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures

Complies with the above standards, but is not limited to them.

Features

1. Ozone tester for measuring ozone concentration in air or water.

2. Electrochemical or UV absorption sensor for accurate ozone detection.

3. Suitable for water treatment, air purification, industrial process and safety monitoring.

4. Includes sensor, display, alarm and data logging for continuous or spot measurement.

5. Supports ozone leak detection, process monitoring and occupational safety compliance.

FAQ

Q1: What testing scenarios is this tester mainly applied to?

A: The ozone tester is used in water treatment plants, air purification systems, food processing, pharmaceutical manufacturing, industrial processes and occupational safety monitoring to measure ozone concentration in air or water. It supports ozone generator performance monitoring in water treatment, indoor air quality assessment for ozone generators and air purifiers, food processing disinfection monitoring, pharmaceutical cleanroom ozone sanitization verification, industrial process ozone concentration control, and occupational safety monitoring for worker exposure to ozone. The tester provides rapid, accurate ozone measurement for process control, safety compliance and equipment performance verification. It is essential for water treatment facilities, food and pharmaceutical processors, industrial users of ozone, occupational health and safety departments, and air quality professionals requiring ozone concentration measurement for process optimization, disinfection efficacy verification, equipment performance, regulatory compliance and worker safety, where ozone is used for disinfection, oxidation or air treatment and where monitoring is critical for effective treatment, cost control and protection against overexposure in water, air and industrial applications.

Q2: What standards does the tester comply with?

A: The ozone tester supports methods referenced in ISO 10313 for ambient ozone, EPA methods for air quality, relevant GB/T and HJ standards for ozone measurement, and occupational exposure limits per OSHA, NIOSH and local regulations. The hardware complies with relevant safety standards. Calibration should use certified ozone reference standards or calibration gas traceable to international standards.

Q3: What is the warranty period for the whole machine and key components?

A: The whole tester is covered by a 12-month warranty. The sensor, electronics and display are covered, while filters, batteries and calibration accessories are consumables or accessories. Damage from improper use, exposure beyond sensor range or unauthorized repair is excluded. Sensor life may be limited by exposure conditions.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires basic training in ozone measurement, sensor calibration and safety. We provide an operation manual and remote guidance. Proper sensor conditioning, calibration, sampling technique and result interpretation are important for accurate ozone measurement. Ozone is hazardous and users should follow safety procedures.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Calibration with certified ozone standards or calibration gas recommended every 3-6 months, or more frequently for critical safety monitoring. Sensor condition and response time verified periodically. Battery replacement when needed. Routine zero and span check before use for safety applications. Sensor replacement when response degrades beyond acceptable limits.

Q7: Are supporting consumables universal?

A: Filters, batteries and calibration accessories are available from specialized suppliers, though sensor-specific parts should be verified. Long-term consumable cost is low to moderate depending on usage and sensor type.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes measurement medium (air or water), sensor type (electrochemical or UV), measurement range, alarm features, data logging and communication. Additional probes, filters and accessories can be ordered separately. Custom orders extend delivery lead-time.

Q9: Does the purchase include on-site installation and commissioning service?

A: Standard delivery includes the tester and accessories with an operation manual. On-site installation, calibration and training are not included for standard orders but can be arranged for industrial monitoring setup. Remote guidance is provided.

Q10: What types of environments are compatible with this equipment?

A: The ozone tester measures ozone in air or water within the measurement range and sensor specification. High humidity, temperature extremes or interfering gases may affect electrochemical sensor readings and require corrections or special sampling. UV absorption sensors are less affected by interferents but require clean optics. Users should select the appropriate sensor type for the medium (air vs. water), calibrate regularly with certified standards, allow proper sensor warm-up and conditioning, account for temperature and humidity effects, follow ozone safety procedures (ozone is a toxic gas), and verify sensor performance periodically. For occupational safety monitoring, the instrument should be calibrated and maintained according to regulatory requirements, and alarms should be set at appropriate exposure limits.