Introduction
Test equipment is a broad category that includes the instruments, apparatus, systems, and fixtures used to measure, test, verify, and evaluate the properties, performance, quality, and compliance of materials, products, components, and processes, across manufacturing, research, and service industries. The category encompasses physical and mechanical testing equipment, such as universal testing machines, hardness testers, impact testers, tensile testers, abrasion and wear testers, and fatigue testers; environmental test equipment, such as temperature and humidity chambers, thermal shock chambers, salt spray chambers, and vibration test systems; electrical and electronic testing equipment, such as multimeters, oscilloscopes, signal generators, insulation testers, and power analyzers; and analytical and measurement instruments, such as spectrometers, chromatographs, gauges, and dimensional measuring systems. Test equipment is used in manufacturing plants for incoming material inspection, in-process control, and final product quality assurance; in research and development laboratories for material characterization, product design verification, and failure analysis; in independent testing and certification laboratories for compliance testing against national and international standards; in maintenance and field service for equipment verification and troubleshooting; and in calibration laboratories for ensuring the accuracy of measurement instruments. The selection of test equipment depends on the parameters to be measured, the required accuracy and range, the applicable test standards, the sample types, and the testing environment, and modern equipment often features automation, data acquisition, and reporting software. With their essential role in verifying quality, safety, and performance, test equipment is fundamental to product development, manufacturing quality assurance, regulatory compliance, and customer confidence.
Temperature And Humidity Test Chamber LTHC-T2010
Temperature And Humidity Test Chamber features a temperature range of - 40℃ to 150℃ and humidity range 20% to 98% RH. It features a hermit compressor to reduce the refrigerant leakage ...
Three roll mill machine TRMM-T2010
Three roll mill machine is used for homogeneous mixing of rubber, materials master-batch & other chemical raw materials. The raw material is mixed with the mixing agent to achieve the de...
Soil moisture meter TSMM-T2011
Soil moisture meter with compact, portable design finds application in moisture measurement of soil & cement, sand, powders. Equipped with display, this soil moisture meter saves time, t...
Soil moisture meter TSMM-T2012
Soil moisture meter with compact, portable design finds application in moisture measurement of soil & cement, sand, powders. Equipped with display, this soil moisture meter saves time, t...
Soil water hardness meter TSHM-T2011
Soil water hardness meter is a handheld design, model with large backlight display and high resolution to show inverted reverse function of numbers on screen. With high accuracy measurem...
Soil moisture meter TSMM-T2010
Soil moisture meter with compact, portable design finds application in moisture measurement of soil & cement, sand, powders. Equipped with display, this soil moisture meter saves time, t...
Soil Water potential tester TSWT-T2010
Soil Water potential tester with high resolution display, measures soil temperature & soil water potential at the same time. This portable soil water potential, automatically obtains the...
Soil water hardness meter TSHM-T2010
Soil water hardness meter comes in handheld design is adopted with theoretical value pressure gauge kg/cm2 to directly measure the soil hardness. Hardness meter used in soil property sur...
Soil Salinity tester TSST-T2010
Soil Salinity tester with handheld design is suitable for accurate measurement of both soil temperature & soil salinity. Equipped with easy to use key buttons, user friendly controls, du...
Soil nutrient tester TSNA-T2011
Soil nutrient tester with microprocessor controlled technology measures nutrient values in % and gives accurate test results. The optical filter present in the nutrient analyzer acts as ...
Soil nutrient tester TSNA-T2010
Soil nutrient tester with microprocessor controlled technology measures nutrient values in % and gives accurate test results. Its printer. The optical filter present in the nutrient anal...
Rubber Low Temperature Brittleness Tester TRBT-T2011
Rubber low temperature brittleness tester extends from room temperature down to -70 °C with stable performance. It maintains temperature fluctuation within ±0.5 °C for highly accurate...
Portable Vibration Calibrator LPVC-T2010
Portable Vibration Calibrator is a tabletop unit with standard sine signals at continually varying frequency from 10 Hz to 1280 Hz. digital panel displays defined amplitude of the accele...
Falling Weight Impact Tester TFWT-T2010
Falling Weight Impact Tester operates within a temperature range of 10 to 35°C and allows a maximum falling height of 2000 mm. It determines the impact resistance of plastic sheets, pip...
Vacuum Leak Tester TVLT-T2010
Vacuum is a benchtop leakage tester with digital display and operation panel to set accurate vacuum degree and vacuum retention time. Use of top quality parts & components ensures reliab...
Oxygen Index Tester TOIT-T2010
Oxygen Index Tester is used to analyze combustion property of homogeneous solid materials, foam, fabric, plastic films, & other materials. This oxygen indexer determines the percentage o...
Folding endurance tester TP-M10
Folding endurance tester is used to measure the folding endurance of paper, cardboard and other paper like sheet, material. The folding clamp can be positioned automatically. The micropr...
Bekk Smoothness Tester LBST-T2010
Bekk Smoothness tester delivers high precision with an accuracy of ±0.1 s for measurements up to 300 s, ensuring reliable testing results. The microprocessor-controlled system is used f...
Mullen burst tester TP-T811
Mullen burst tester is used to measure the bursting strength of paper submitted to increasing hydraulic pressure. Used in testing bursting strength of all types of papers in the 0 to 160...
Crush tester TP-L10
Crush tester is adopted with advanced parts, microprocessor controlled system and multifunctional design to test, translate, adjust, display, remember, and print the test data. User can ...
Paper tearing tester TP-T720
Paper tearing tester is an advanced instrument used for testing tearing strength of the paper and paperboard. This tearing tester comes with 43 ± 0.5 mm tearing distance and 104 mm long...
Electronic Tearing tester TP-T721
Electronic Tearing tester is adopted with advanced and supporting components, single-chip microcomputer and has reasonable structure and multi- function design. The variety of parameters...
Mullen burst tester TP-T810
Mullen burst tester is used to measure the bursting strength of paper submitted to increasing hydraulic pressure. Used in testing bursting strength of all types of papers in the 0 to 560...
Carton compression tester TP-T611
Carton compression tester with 100 mm/min return speed level measures the compressive strength of carton box. The compressor tester, adopted with chip, powerful data functioning system, ...
Paper Air Permeability Tester TP-T710
Paper air permeability tester is designed to measure the air permeability under specified conditions with time & unit pressure difference. It measures the average air flow through the un...
Puncture strength tester TP-T712
Puncture strength tester has electrical mechanical integration design, with compact structure, easy maintenance. The puncture tester has an open design, simple operation, automatic measu...
Softness tester TP-T510
Softness Tester has a measurement range of 10 to 1000 mN, allowing it to assess a wide range of material softness. It has a 1 mN division value, allowing precise detection of small force...
Carton compression tester TP-T610
Carton compression tester with 100 mm/min return speed level measures the compressive strength of carton box. The compressor tester, adopted with chip, powerful data functioning system, ...
Paper and cardboard thickness meter TP-T2020
Paper and cardboard thickness meter measures thickness of paper, corrugated papers using contact measurement method. The Analogue (pointer type) type gauge display is mounted at top with...
Paper and cardboard thickness meter TP-T2021
Paper and cardboard thickness meter measures thickness of paper, corrugated papers using contact measurement method. The Analogue (pointer type) type gauge display is mounted at top with...
Ink rubber tester TP-T310
Ink rubber tester with benchtop design is used to measure printing ink layers decolorization, rub resistance on low or high printable surface. This tester effectively analyzes the proble...
Standard strip cutter TP-T410
Standard strip cutter with sleek and advanced design is used to cut the sheet of cardboard or paper into fine strips. It’s a common standard cutter which can cut the sample with 15 mm w...
Electronic bending stiffness tester TP-T2010
Electronic bending stiffness tester comes with microprocessor controlled system, highly advanced motor, low noise operations determines the bending stiffness/ rigidity of paper, paperboa...
Coefficient of friction tester TP-T2010
Coefficient of friction tester has a measuring range of 0 to 5 N and uses a slider weighing 200 g ± 2 g. The tester features a real-time display that shows measurement results instantly...
Water absorption tester- Cobb Tester TP-T2021
Water absorption tester- Cobb Tester is used for the determination of the water absorption of sized paper, paperboard, and corrugated paper under standard conditions within 200 to 250 g/...
COBB sample cutter TP-T2030
sample cutter with user friendly operations, benchtop design, is an important instrument for paper & cardboard cutting. It can cut the sample quickly & precisely. It is the ideal auxilia...
Water absorption tester TP-T2020
Water absorption tester is used to measure the degree of water absorption of a paper & cloth. Designed using ‘Rise in capillary by millimeters’ principle, where a specimen is suspended...
Automatic horizontal tensile tester TP-T2011
Automatic horizontal tensile tester is adopted with pneumatic clamps to minimize the error by proper holding of the sample. With the advanced technology, it has strong data processing fu...
Automatic horizontal tensile tester TP-T2012
Automatic horizontal tensile tester is adopted with pneumatic clamps to minimize the error by proper holding of the sample. With the advanced technology, it has strong data processing fu...
Vertical tensile tester LVTT-T2020
Vertical Tensile Tester provides precise tensile testing with adjustable sample length 20 to 200 mm. It adopts a vertical multi pillar structure with adjustable clamp distance for versat...
Pulp beating (refining) freeness tester TP-T2010
Pulp beating (refining) freeness tester is used to measure the rate of dilution of pulp suspended water materials and to determine de-watering time. It is adopted with spring pre-tighten...
Tensile Stiffness Tester TP-T2010
Tensile Stiffness Tester is a used to measure the bending resistance (stiffness) of paper and paperboard. It is designed in accordance with working principle of international ‘Static be...
Whiteness Meter LWM-T2012
Whiteness meter features a low zero drift of ≤ 0.1 %, which ensures precise and reliable measurements even during extended operation and repeated testing. The compact, advanced circuit ...
Whiteness and chromaticity tester LWACT-T2010
Whiteness and chromaticity tester is based on a D/0 geometry with a 150 mm diffuser and a 30 mm test aperture, ensuring uniform illumination. It offers excellent stability of less than e...
Ozone Test Chamber LOC-T2013
Ozone Test Chamber equipped with a 700 mm diameter holder with a 350 mm side length, provides accurate ozone concentration measurement. It has a built-in safety voltage protection module...
Ozone Test Chamber LOC-T2014
Ozone Test Chamber is equipped with advanced a 900 mm diameter holder and a 460 mm side length to provide ample space for large samples. It features a UV detector for ozone concentration...
Ozone Test Chamber LOC-T2012
Ozone Test Chamber accurate ozone concentration tests and has a holder with a diameter of 600 mm and a side length of 220 mm. It includes both static and dynamic sample holders for versa...
Ozone Test Chamber LOC-T2011
Ozone Test Chamber has a 250 L capacity, and a temperature control range from 0 °C to 100 °C. It features a high-accuracy PT100 temperature sensor and a silent-discharge ozone generato...
Ozone Test Chamber LOC-T2010
Ozone Test Chamber has a 100 L capacity, and a temperature control range from 0 °C to 100 °C. It features a high-accuracy PT100 temperature sensor and a silent-discharge ozone generato...
Flammability Tester LFLC-T2012
Flammability Tester is a horizontal and vertical flame chamber with touch screen control panel. Features adjustable burning time and gas flow with automatic / manual, vertical / horizont...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Test equipment for material, product and environmental testing across industries.
2. Wide range of testing instruments for quality control, research and compliance.
3. Suitable for manufacturing, construction, automotive, electronics and research laboratories.
4. Includes mechanical, electrical, chemical, thermal and environmental testing instruments.
5. Quality-tested equipment meeting relevant industry and international standards.
FAQ
Q1: What testing scenarios is this equipment mainly applied to?
A: Test equipment encompasses a broad range of instruments used in manufacturing, construction, automotive, electronics, chemical, pharmaceutical and research laboratories to evaluate the properties, performance and quality of materials, products and environmental conditions. It supports mechanical testing including tensile, compression and hardness measurement; electrical testing including insulation resistance and dielectric strength; chemical analysis including composition and purity determination; thermal testing including temperature resistance and thermal analysis; environmental testing including humidity, vibration and altitude simulation; and dimensional and quality inspection. These instruments are essential for quality control, product development, regulatory compliance, failure analysis and research across industries, where accurate, reliable testing is critical for ensuring product quality, safety, performance and regulatory compliance, and where the right test equipment provides the data needed for informed decisions about materials, products and processes in manufacturing, construction, automotive, electronics and research applications.
Q2: What standards does the equipment comply with?
A: Test equipment complies with various ISO, ASTM, IEC, DIN and relevant GB/T standards depending on the specific instrument and test method. Calibration should be traceable to international standards for accredited testing. Regulatory compliance testing follows applicable industry and government standards. Users should verify the specific standards and certifications for each instrument at the time of purchase.
Q3: What is the warranty period for the equipment?
A: Warranty varies by equipment type and manufacturer. Most test instruments carry a 12-month warranty covering the main unit, sensors and control system, while consumables, accessories and wear parts are excluded. Specific warranty terms should be confirmed for each instrument at the time of purchase. Extended service contracts are often available for high-value equipment.
Q4: Is this equipment difficult to operate? Is professional training required?
A: Training requirements vary by instrument complexity. Simple measuring tools require minimal training, while advanced analytical or mechanical testing systems require specialist training. We provide operation manuals, training and application support for equipment products. Proper operation, calibration and maintenance are important for accurate test results.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Calibration requirements vary by instrument type and application. Test instruments used for accredited or regulatory testing require regular calibration with certified standards traceable to international standards, typically every 6-12 months. Routine verification and maintenance follow manufacturer instructions. Users should establish a calibration schedule based on instrument type, usage intensity and regulatory requirements.
Q7: Are supporting consumables universal?
A: Consumables and accessories vary by instrument type. Many are available from multiple qualified suppliers, while instrument-specific parts should be sourced from the manufacturer or authorized distributor. Long-term consumable and maintenance cost depends on equipment type and usage intensity.
Q8: Can I customize equipment or supporting accessories?
A: Customization options vary by equipment type. Many instruments offer configurable features, ranges and accessories. Specialized testing systems may be custom-built to specific requirements. Customization options and lead-times should be confirmed for each instrument.
Q9: Does the purchase include on-site installation and commissioning service?
A: Installation requirements vary by equipment. Simple instruments require no installation beyond setup. Complex testing systems often include on-site installation, commissioning, calibration and training. Standard delivery includes equipment with operation manuals where applicable. Installation services can be arranged for equipment purchases as needed.
Q10: What types of applications are compatible with this equipment?
A: Test equipment is designed for specific testing applications within its specified measurement ranges, capacities and environmental ratings. Equipment selection should match the test method, sample type, required accuracy and applicable standards. Users should verify instrument specifications, calibration status and compatibility before use, follow standard test methods and operating procedures, perform regular calibration and maintenance, ensure proper operator training, and document all test conditions and results for quality assurance, regulatory compliance and data traceability. Properly calibrated and operated test equipment ensures reliable, reproducible and defensible test results.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.