Introduction
Mildew incubators with humidity control simulate environmental conditions for mold growth testing. They are widely used in textile and material testing. The system ensures controlled microbial growth. It solves inconsistent environmental simulation. By providing stable humidity and temperature, it supports durability testing.
Mildew Incubator With Humidity Control LMIHC-T2011
Mildew Incubator with Humidity Control comes with a spacious 250L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 10 to 60°...
Mildew Incubator With Humidity Control LMIHC-T2010
Mildew Incubator with Humidity Control has a spacious 150L capacity, making it suitable for various sample sizes. It offers a temperature range from 10 to 60°C, providing precise contro...
Mildew Incubator LIM-T2014
Mildew Incubator offers a spacious 1000L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial ...
Mildew Incubator LIM-T2013
Mildew Incubator is made with an 800L capacity for handling various sample sizes. It provides precise temperature control from 0–60°C, suitable for microbial and testing. The internal ...
Mildew Incubator LIM-T2012
Mildew Incubator offers a spacious 500L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial g...
Mildew Incubator LIM-T2011
Mildew Incubator offers a spacious 250L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial g...
Mildew Incubator LIM-T2010
Mildew Incubator has a spacious 150L capacity, making it suitable for various sample sizes. It offers a temperature range from 0 to 60°C, providing precise control for different microbi...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Mildew incubator with humidity control providing stable temperature and humidity conditions.
2. Precise temperature and humidity control for mildew and mould testing.
3. Uniform environmental conditions across the chamber for reproducible results.
4. Digital display and control for monitoring and setting parameters.
5. Suitable for mildew resistance testing, material testing and biological incubation.
FAQ
Q1: What is the mildew incubator with humidity control mainly used for?
A: It is used to test the mildew resistance of materials, textiles, leather, wood and electronics, and to culture moulds under controlled temperature and humidity. Stable environmental control supports reproducible mildew testing and biological incubation.
Q2: What standards does the mildew incubator comply with?
A: The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory incubation and environmental test equipment. Mildew testing should follow the applicable standard methods for the material being tested. Compliance documentation can be provided on request.
Q3: What is the warranty period for the incubator and key components?
A: The complete unit carries a 12-month warranty covering the heating, humidification and refrigeration systems, plus the controller. Filters, sensors and accessories are excluded as wearing parts. Damage from improper use or unauthorised repair is not covered.
Q4: Is the incubator difficult to operate?
A: Operation requires basic training in environmental test parameter setting and sample handling. The manual explains temperature and humidity control, and remote guidance is available. Proper chamber cleaning is important between tests to avoid cross-contamination.
Q5: What is the typical lead time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Does the incubator require calibration or verification?
A: Temperature and humidity sensors should be verified periodically against calibrated references, typically every 6 to 12 months. The unit is factory tested before delivery. Optional verification service can be arranged.
Q7: Are consumables or spare parts universal?
A: Filters, sensors and standard spare parts are available through our channel. No proprietary consumables are required. Provide the model and serial number when ordering.
Q8: Can the incubator be customised?
A: Yes, options include different chamber sizes, temperature and humidity ranges, 220V or 110V supply and data logging. We confirm each option before order confirmation.
Q9: Is installation and commissioning included?
A: The unit is commissioned by following the manual, including electrical checks, water connection for humidification and a test run. Remote guidance is available during commissioning. On-site installation can be arranged separately.
Q10: What materials should not be incubated in this unit?
A: Flammable, volatile or highly corrosive materials should not be incubated without appropriate precautions. Pathogenic organisms require biosafety containment. Follow laboratory biosafety regulations.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.