Introduction
A mildew incubator simulates environmental conditions for mold growth testing. It is widely used in textile and material testing. The system ensures controlled humidity and temperature. It solves inconsistent fungal testing. By providing stable conditions, it supports durability evaluation.
Mildew Incubator With Humidity Control LMIHC-T2011
Mildew Incubator with Humidity Control comes with a spacious 250L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 10 to 60°...
Mildew Incubator With Humidity Control LMIHC-T2010
Mildew Incubator with Humidity Control has a spacious 150L capacity, making it suitable for various sample sizes. It offers a temperature range from 10 to 60°C, providing precise contro...
Mildew Incubator LIM-T2014
Mildew Incubator offers a spacious 1000L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial ...
Mildew Incubator LIM-T2013
Mildew Incubator is made with an 800L capacity for handling various sample sizes. It provides precise temperature control from 0–60°C, suitable for microbial and testing. The internal ...
Mildew Incubator LIM-T2012
Mildew Incubator offers a spacious 500L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial g...
Mildew Incubator LIM-T2011
Mildew Incubator offers a spacious 250L capacity, making it ideal for handling samples of various sizes. It provides precise temperature control from 0 to 60°C, suitable for microbial g...
Mildew Incubator LIM-T2010
Mildew Incubator has a spacious 150L capacity, making it suitable for various sample sizes. It offers a temperature range from 0 to 60°C, providing precise control for different microbi...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Smooth interior surfaces are easy to clean and disinfect.
2. Accurate temperature and humidity control for consistent fungal growth.
3. Uniform conditions across the chamber support reproducible results.
4. Data logging option supports traceable test records.
5. Adjustable shelves hold a variety of specimens and containers.
FAQ
What is the Mildew Incubator mainly used for?
The Mildew Incubator is used to culture mould and mildew and to test the fungal resistance of materials such as textiles, leather, wood, plastics, coatings and electronics. It provides the controlled temperature and humidity needed for reproducible fungal growth and resistance studies.
Which standards and regulations apply to the Mildew Incubator?
The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for incubators and environmental test equipment. Fungal resistance tests should follow the applicable standard methods. Compliance documentation can be provided on request.
What does the warranty cover?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Is the Mildew Incubator difficult to operate?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Mildew Incubator need calibration or verification?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Where do we get replacement parts?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Are options or configurations available?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Do you provide on-site installation?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What maintenance and safety points matter?
Do not incubate flammable, volatile or highly corrosive substances, and handle pathogenic fungi under appropriate containment. Clean the chamber between tests to avoid cross-contamination. Follow biosafety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.