Introduction
A metallographic mounting machine is used to embed samples for material analysis. It is widely used in metallurgy laboratories. The system ensures sample stability. It solves handling difficulties of small samples. By providing resin mounting, it supports microscopic examination.
Cold Mounting Press Machine LMPM-T2030
Cold Mounting Press Machine enables high-pressure embedding from 0.5 to 2 bar. It is designed for delicate and temperature-sensitive specimens. The system ensures bubble-free curing with...
Hot Mounting Press Machine LMPM-T2017
Hot Mounting Press Machine features a pressure setting range of 0 to 60 Bar for consistent sample embedding. It supports quadruple-sample mounting in a single cycle. The fully automatic ...
Hot Mounting Press Machine LMPM-T2016
Hot Mounting Press Machine provides a pressure range of 0 to 60 Bar, ensuring consistent and accurate embedding of metallographic specimens. It operates with silent hydraulic pressurizat...
Hot Mounting Press Machine LMPM-T2015
The Hot Mounting Press Machine enables dual-sample embedding and operates within a temperature range of 0 to 200°C. It features a touchscreen interface that simplifies control and enhan...
Hot Mounting Press Machine LMPM-T2014
Hot Mounting Press Machine supports a temperature range of 0 to190°C, enabling efficient thermoset embedding of specimens. This comes with a user-friendly touchscreen interface for easy...
Hot Mounting Press Machine LMPM-T2013
Hot Mounting Press Machine offers a temperature range of 0 to 200°C, allowing precise thermosetting for sample mounting. The manual pressure mechanism ensures controlled and consistent ...
Cold Mounting Press Machine LMPM-T2021
Cold Mounting Press Machine is -controlled with a maximum air source pressure of 0.6MPa, ensuring efficient cold mounting. It stores up to 999 process parameters, which can be easily rec...
Cold Mounting Press Machine LMPM-T2020
Cold Mounting Press Machine operates at a working pressure of 0.2MPa, making it ideal for cold mounting processes. Its sample chamber diameter is 200mm, providing ample space for mountin...
Cold Mounting Press Machine LMPM-T2011
Cold Mounting Press Machine comes with automatic operation, achieving a maximum vacuum of -0.09 MPa within one minute. It supports various mold shapes, including 20, 40, and 50mm diamete...
Cold Mounting Press Machine LMPM-T2010
Cold Mounting Press Machine achieves a maximum vacuum of -0.09 MPa within one minute. Equipped with a high-strength vacuum chamber and built-in vacuum pump, it effectively removes air fr...
Hot Mounting Press Machine LMPM-T2012
Hot Mounting Press Machine incorporates a dual-cylinder design, enabling the mounting of up to 4 samples at once with a mold diameter of 30 mm. The adjustable pressure range of 0 to 6 MP...
Hot Mounting Press Machine LMPM-T2010
Hot Mounting Press Machine is equipped with advanced a standard die diameter of Φ30mm, offering versatility for various sample sizes. The mosaic temperature range is adjustable from 0 t...
Hot Mounting Press Machine LMPM-T2011
Hot Mounting Press Machine comes with a standard 30 mm die. Optional die sizes include 25 mm, 40 mm, and 50 mm, and custom sizes like 1 inch, 1.25 inch, and 1.5 inch are also available. ...
Standards
ASTM E3-11(2025)-Standard Guide for Preparation of Metallographic Specimens
ISO/TR 20580:2022-Preparation of metallographic specimens
Complies with the above standards, but is not limited to them.
Features
1. Pre-set routines shorten set-up for repeated standard procedures.
2. Clear controls and display support straightforward operation.
3. Low running costs and no locked consumable requirement.
4. Remote diagnostics support faster servicing and less downtime.
5. Compact dimensions and light weight ease bench placement.
FAQ
What is the Metallographic Mounting Machine mainly used for?
The Metallographic Mounting Machine is used for a defined laboratory measurement, preparation or processing task. It supports analytical, quality-control, research, clinical or industrial work where consistent, repeatable results are required.
Which standards and regulations apply to the Metallographic Mounting Machine?
The instrument is designed with reference to IEC 61010 electrical safety, the applicable international standard for the measurement or process and relevant GB/T standards. Procedures should follow the relevant method. Compliance documentation can be provided on request.
How long is the warranty period?
The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.
Is the Metallographic Mounting Machine difficult to operate?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Is calibration included?
To protect result reliability, periodic verification should be performed, typically once or twice a year. The instrument arrives factory-calibrated, and self-check routines help spot drift. We offer traceable calibration service if the site needs it.
Where do we get replacement parts?
Filters, seals, probes and similar items are standard and can be supplied through our channel. Customers may also source equivalent items that meet the specification. Provide the model and serial number to confirm compatibility before ordering.
Are options or configurations available?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
How is the Metallographic Mounting Machine commissioned?
Standard installation is straightforward and supported by the manual and start-up documentation. Our technical team can guide staff remotely through checks and validation. On-site commissioning is available as a quoted service.
What should be avoided when using the Metallographic Mounting Machine?
Do not use the instrument outside its rated range or intended samples, skip calibration or ignore safety and maintenance instructions. Follow the operating manual and laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.