Introduction
An IR carbon sulfur analyzer measures carbon and sulfur content in metals and materials. It is widely used in metallurgy and material testing. It solves traditional slow chemical analysis and provides fast, accurate elemental composition results.
IR Carbon And Sulphur Analyzer LCSA-T2011
IR Carbon And Sulfur Analyzer includes five infrared detection pools, expanding its sulfur measurement range from 0.1 to 60%. It ensures precise readings with a carbon detection range of...
IR Carbon And Sulphur Analyzer LCSA-T2010
IR Carbon and Sulfur Analyzer features four independent infrared detection pools for accurate carbon and sulfur analysis. It measures carbon from 0.001 to 50% and sulfur from 0.00001 to ...
IR Carbon And Sulphur Analyzer LCSA-T2030
IR Carbon and Sulphur Analyzer measures carbon in the range of 0.00002% to 10% and sulfur from 0.00002% to 5%. With a detector sensitivity of 0.01 ppm, it ensures accurate trace-level de...
IR Carbon And Sulfur Analyzer LCSA-T2021
IR Carbon And Sulfur Analyzer includes three detector sets for high-carbon, low-sulfur, and carbon monoxide analysis. It measures carbon up to 20% and sulfur up to 5%, with expandable ra...
IR Carbon And Sulphur Analyzer LCSA-T2020
IR Carbon And Sulfur Analyzer has two sets of detectors for high-carbon and low-sulfur analysis, ensuring reliable measurement. It measures carbon from 0.0001 to 20% and sulfur from 0.00...
IR Carbon and Sulphur Analyzer LCSA-T2011
IR Carbon and Sulphur Analyzer is a high-frequency infrared analyzer for carbon (0.0001% to 10%) and sulfur (0.0001% to 3.5%) with fast 35-second analysis. Its detection unit features a ...
IR Carbon and Sulphur Analyzer LCSA-T2013
IR Carbon and Sulphur Analyzer stands out with its exceptional detection sensitivity of 0.1 ppm. It is achieved through a combination of a precious metal light source, pyroelectric solid...
IR Carbon and Sulphur Analyzer LCSA-T2012
IR Carbon and Sulphur Analyzer is a unit for determination of sulphur and carbon equipped with two treatment units including a high frequency induction burner and flexible temperature se...
IR Carbon and Sulphur Analyzer LCSA-T2010
IR Carbon and Sulphur Analyzer is a unit for determination of sulphur and carbon equipped with two treatment units including a high frequency induction burner and flexible temperature se...
Standards
ASTM D4294-Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D2622-Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ISO 8754:2003-Petroleum products-Determination of sulfur content-Energy-dispersive X-ray fluorescence method
Complies with the above standards, but is not limited to them.
Features
1. Data output or recording supports traceable records.
2. Compact dimensions and light weight ease bench placement.
3. Easy cleaning and maintenance extend service life.
4. Low running costs and no locked consumable requirement.
5. Calibration and self-check functions support accuracy.
FAQ
What is the IR Carbon Sulphur Analyzer mainly used for?
The IR Carbon Sulphur Analyzer is used for a defined laboratory measurement, preparation or processing task. It supports analytical, quality-control, research, clinical or industrial work where consistent, repeatable results are required.
What standards does the IR Carbon Sulphur Analyzer comply with?
The instrument is designed with reference to IEC 61010 electrical safety, the applicable international standard for the measurement or process and relevant GB/T standards. Procedures should follow the relevant method. Compliance documentation can be provided on request.
What warranty comes with the IR Carbon Sulphur Analyzer?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Is the IR Carbon Sulphur Analyzer difficult to operate?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the IR Carbon Sulphur Analyzer be calibrated?
To protect result reliability, periodic verification should be performed, typically once or twice a year. The instrument arrives factory-calibrated, and self-check routines help spot drift. We offer traceable calibration service if the site needs it.
Are the consumables universal or proprietary?
The instrument uses standard, widely available consumables rather than special locked items. Replacement parts, accessories and consumables can be ordered from us against the model number. We keep common service parts in stock for prompt supply.
Are options or configurations available?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Is installation and commissioning included?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What maintenance and safety points matter?
Do not use the instrument outside its rated range or intended samples, skip calibration or ignore safety and maintenance instructions. Follow the operating manual and laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.