Introduction
A pen type infrared thermometer is a compact, pen-shaped thermometer that measures the temperature of the surfaces by the detection of the infrared radiation emitted from the surfaces, without the contact, and it is used in the industry, the laboratories, the food, the automotive, and the many other applications. The pen type infrared thermometer consists of an infrared sensor, the optics that focus the infrared radiation, the electronics, and a digital display, and it measures the surface temperature by the detection of the infrared radiation, and it displays the temperature, with features such as the adjustable emissivity, the laser pointer, and the data hold; the pen type infrared thermometer is compact and portable, and it is used for the measurement of the temperature of the surfaces, such as the pipes, the motors, the bearings, and the electrical components, for the measurement of the temperature in the process control, for the measurement of the temperature of the food, for the inspection, for the maintenance, and for many other applications; the pen type infrared thermometer provides a rapid and a non-contact temperature measurement, and it is an essential instrument for the temperature measurement. Pen type infrared thermometers are used in the industry, in the laboratories, in the food industry, in the automotive, and for many other applications. With their non-contact measurement, pen type infrared thermometers are essential for the surface temperature measurement.
Pen-Type Infrared Thermometer T-S210PTT
Pen-type infrared thermometer is a pocket size thermometer for non-contact measurement of temperature. Large, clear LCD with single push button operation makes it easy to to operate.
Appl...
Standards
IEC 60751:2008-Industrial platinum resistance thermometers and platinum temperature sensors
Complies with the above standards, but is not limited to them.
Features
1. Pen-type infrared thermometer for non-contact surface temperature measurement.
2. Laser pointer targets the measurement spot for accurate aiming at small or distant surfaces.
3. Digital display shows instant temperature reading with emissivity adjustment for different materials.
4. Compact pen design with pocket clip supports portable use in industrial, electrical and food service applications.
5. Includes battery and instruction manual, with auto power-off and low-battery indication.
FAQ
Q1: What testing scenarios is this instrument mainly applied to?
A: The pen-type infrared thermometer is used for non-contact temperature measurement of electrical equipment, mechanical components, food surfaces, HVAC ducts and industrial process surfaces. It supports preventive maintenance by detecting overheating bearings, electrical connections and motors, and is useful in food service for surface temperature checks where contact measurement is impractical or unsanitary. Its compact size allows one-handed operation in tight spaces.
Q2: What standards does the instrument comply with?
A: The thermometer complies with relevant IEC 61010 laboratory safety standards and ASTM E1965 for infrared thermometer evaluation. Industrial and electrical safety applications may reference NFPA and local electrical inspection guidelines. Emissivity setting should be matched to the target material for accurate readings.
Q3: What is the warranty period for the whole machine and key components?
A: The thermometer carries a 12-month warranty against manufacturing defects. The infrared sensor, laser module and display are covered, while the battery is a consumable excluded from warranty. Damage from dropping, excessive heat exposure or unauthorized repair is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation is simple: aim at the target, pull the trigger and read the display. No professional training is required, but users should understand emissivity, distance-to-spot ratio and reflection effects for accurate measurement. The instruction manual provides guidance on these factors.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Calibration verification against a reference blackbody or contact thermometer is recommended every 6-12 months. For industrial maintenance programs, annual calibration is common. The laser pointer alignment should be checked periodically to ensure the measurement spot matches the visible laser dot.
Q7: Are supporting consumables universal? What about the long-term procurement cost?
A: Batteries are standard and available from general suppliers. There are no recurring proprietary consumables. Long-term ownership cost is very low for a pen-type infrared instrument.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes temperature range, emissivity presets, laser type and branding. Minimum order quantities apply for custom versions. Users should specify the target material and distance requirements for appropriate specification.
Q9: Does the purchase include on-site installation and commissioning service?
A: No installation is required. The package includes the thermometer, battery and instruction manual. On-site training is not included for standard orders.
Q10: What types of samples are compatible with this equipment?
A: The thermometer measures surface temperature of solid objects within the rated range and distance-to-spot ratio. It is not suitable for measuring transparent surfaces, highly reflective metals without emissivity adjustment, gases or liquids in motion. Shiny surfaces may require tape or emissivity adjustment for accurate readings. The instrument should not be pointed at eyes or reflective surfaces that could redirect laser energy.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.