Introduction
A laboratory washer and disinfector is a state-of-the-art, multifunctional apparatus vital for maintaining the highest standards of cleanliness and sterility in scientific and medical facilities. This advanced system features a range of automated functions, including high-pressure water jets, thermal disinfection, and rapid drying, ensuring that laboratory glassware, equipment, and utensils are thoroughly cleaned and decontaminated. The precision and consistency our product offers are indispensable in research and healthcare settings, minimizing the risk of cross-contamination and guaranteeing reliable results. Its intuitive user interface allows for customization of cleaning cycles, accommodating a wide variety of laboratory needs. With its compact design and impressive efficiency, this laboratory washer and disinfector significantly streamlines operations, saving valuable time and resources while upholding a hygienic and secure laboratory environment.
Glassware Washer T-S221GW
Glassware Washer provides a chamber capacity of 185 L for efficient cleaning of a wide range of glassware. It incorporates an automatic alert for low-detergent levels, facilitating consis...
Glassware Washer T-S229GW
Glassware Washer is designed with a chamber capacity of 680 L to accommodate large batches of laboratory glassware. It features water circulation at a flow rate of 0 to 1600 L/min, ensuri...
Glassware Washer T-S227GW
Glassware Washer provides a chamber capacity of 317 L, facilitating efficient cleaning for large volume glassware. It includes a double-channel peristaltic pump for accurate liquid dispen...
Glassware Washer T-S228GW
Glassware Washer features a cleaning capacity of 317 L, designed for efficient cleaning of laboratory glassware. It includes a double circulation pump, preventing glassware damage due to ...
Glassware Washer T-S224GW
Glassware Washer provides a chamber capacity of 223 L, accommodating various laboratory glassware. It integrates multiple heat protection systems to ensure the safety and integrity of the...
Glassware Washer T-S225GW
Glassware Washer provides a chamber capacity of 223 L for effective cleaning of large laboratory glassware. It provides multiple heat protection systems to ensure the safety and integrity...
Glassware Washer T-S226GW
Glassware Washer features a cleaning chamber capacity of 223 L providing effective washing for a wide range of glassware. It includes a multi-layer filtration system, ensuring a clean was...
Glassware Washer T-S222GW
Glassware Washer provides a chamber capacity of 185 L, designed for efficient glassware cleaning. It features an adjustable pump function to control flow rates from 0 to 500L/min, ensurin...
Glassware Washer T-S223GW
Glassware Washer features adjustable water flow rates from 0 to 600 L/min for different cleaning needs. It provides a chamber capacity of 223 L for efficiently cleaning large laboratory g...
Glassware Washer T-S220GW
Glassware Washer provides a chamber capacity of 158L, ensuring efficient cleaning of laboratory glassware. It utilizes an intelligent switch door system for quick access and improved user...
Glassware Washer T-S212GW
Glassware Washer is an intelligent microprocessor-controlled unit with programmable operation cycles and PLC control system. Features 420 L capacity with stainless steel interior and exte...
Glassware Washing Machine T-S210GWM
Glassware washing machine is a fully automated CPU SCM controlled laboratory glassware cleansing unit. It is characterized with excellent washing and anti-bacterial thermal disinfection w...
Glassware Washer T-S210GW
Glassware Washer is a basic type 65 L disinfector features washing of glassware with 93 °C hot water. Features integrated rapid heating system with 6 washing programs and presetting of l...
Glassware Washer T-S211GW
Glassware Washer is a basic type 160 L disinfector features washing of glassware with 93 °C hot water. Features integrated rapid heating system with 6 washing programs and presetting of ...
Standards
ISO 15883-1:2024-Washer-disinfectors-General requirements, terms and definitions and tests
ISO 15883-2:2024-Washer-disinfectors-Requirements and tests for thermal disinfection of critical and semi-critical medical devices
Complies with the above standards, but is not limited to them.
Features
1. Adjustable racks and baskets hold varied items.
2. Data or printer options provide cycle records.
3. Drying and condensate functions improve turn-around.
4. Pre-set programs suit glassware, instruments and contaminated items.
5. Door and water safety devices protect users.
FAQ
What is the Laboratory Washer and Disinfector mainly used for?
The Laboratory Washer and Disinfector is used to wash and decontaminate glassware, instruments or parts automatically. It supports laboratories, healthcare, central services and production areas needing consistent, traceable cleaning.
What standards does the Laboratory Washer and Disinfector comply with?
The unit is designed with reference to applicable washer-disinfector standards, IEC 61010 electrical safety and relevant GB/T methods. Cycles and detergents should follow validated procedures. Compliance documentation can be provided on request.
What does the warranty cover?
A 12-month warranty applies to the complete equipment against defects in materials and workmanship. It excludes consumables, wearing components and accidental or misuse damage. Our service team handles claims against the serial number, and longer cover can be arranged.
How easy is the Laboratory Washer and Disinfector to use?
Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Laboratory Washer and Disinfector be calibrated?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are consumables and spare parts easy to obtain?
The instrument uses standard, widely available consumables rather than special locked items. Replacement parts, accessories and consumables can be ordered from us against the model number. We keep common service parts in stock for prompt supply.
Can it be adapted to our requirements?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
Do you provide on-site installation?
Standard installation is straightforward and supported by the manual and start-up documentation. Our technical team can guide staff remotely through checks and validation. On-site commissioning is available as a quoted service.
What maintenance and safety points matter?
Do not overload racks, block spray arms or wash incompatible items. Use the correct detergent and ensure drying. Follow the operating instructions.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.