Introduction
Glass tube air dryer is a device used to remove moisture from compressed air or gas streams. It typically consists of a transparent glass tube filled with a desiccant material, such as silica gel or activated alumina, and is connected to inlet and outlet ports for airflow. As moist air flows through the glass tube, the desiccant material adsorbs the water vapor, resulting in dry air exiting from the outlet. These dryers are commonly utilized in laboratory and industrial settings where the presence of moisture in compressed air can lead to corrosion, contamination, and adverse effects on equipment and processes. The transparent design of the glass tube allows for visual inspection of the desiccant material, making it easy to determine when the material needs replacement or regeneration.
Glass Tube Air Dryer T-S222GTAD
Glass Tube Air Dryer has a capacity of 30 tubes, ensuring efficient and uniform processing of multiple samples. It operates at temperatures up to 120 °C, allowing uniform and efficient...
Glass Tube Air Dryer T-S220GTAD
Glass Tube Air Dryer delivers a capacity of 12 tubes, ensuring uniform airflow and consistent performance. It features an advanced air circulation system, maintaining consistent condition...
Glass Tube Air Dryer T-S221GTAD
Glass Tube Air Dryer has a capacity of 20 tubes for safe and effective drying. It provides temperature control up to 120 °C, ensuring consistent conditions for processing. It is equippe...
Glass Tube Air Dryer T-S211GTAD
Glass Tube Air Dryer delivers a 20-tube capacity for drying multiple samples. It provides temperature control up to 120 °C, ensuring efficient and reliable performance. It is equipped w...
Glass Tube Air Dryer T-S212GTAD
Glass Tube Air Dryer features a 30-tube capacity, allowing efficient handling of samples. It operates at temperatures up to 120 °C for uniform and efficient drying. It features precise...
Glass Tube Air Dryer T-S210GTAD
Glass Tube Air Dryer has a capacity of 12 tubes with a temperature range of up to 120 °C, for precise and safe drying. It provides a blast rate of 9 m²/min, ensuring uniform airflow ...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Over-temperature protection safeguards samples.
2. Clear display shows temperature and time.
3. Adjustable shelves or trays suit different loads.
4. Vent or exhaust removes moist air.
5. Easy-to-clean surfaces resist residues.
FAQ
What is the Glass Tube Air Dryer mainly used for?
The Glass Tube Air Dryer is used to remove moisture from samples, parts or products under controlled conditions. It supports laboratory, food, chemical, pharmaceutical and industrial preparation work.
What standards does the Glass Tube Air Dryer comply with?
The unit is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for drying equipment. Procedures should follow the relevant method. Compliance documentation can be provided on request.
How long is the warranty period?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
How easy is the Glass Tube Air Dryer to use?
The controls are designed for regular laboratory use, so most users become confident after a brief introduction. The manual walks through each step, and common settings can be saved for repeat work. Online or on-site training is available if the site requires it.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Glass Tube Air Dryer need calibration or verification?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are consumables and spare parts easy to obtain?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can it be adapted to our requirements?
The standard model can be configured with selected accessories and operating options to suit the task. Non-standard requests are assessed before quotation so the final build is clearly defined. We confirm details before production.
Is installation and commissioning included?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What maintenance and safety points matter?
Do not dry flammable or heat-sensitive items beyond the design, overload the chamber or block airflow. Use the correct temperature. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.