Introduction
Temperature Uncontrolled Heating Mantles are designed for efficient and reliable sample heating in a variety of laboratory applications. These mantles ensure even heat distribution, leading to consistent and dependable results. They come in different capacities to meet a variety of heating needs. These mantles operate continuously, providing uninterrupted performance during extended use. heating mantles are ideal for research facilities, educational institutions, and chemical laboratories.
Temperature Uncontrolled Heating Mantle T-S219UHM
Temperature Uncontrolled Heating Mantle features a 20,000 ml sample capacity, ensuring reliable heating. It operates efficiently up to 380 °C, providing uniform and consistent sample hea...
Temperature Uncontrolled Heating Mantle T-S217UHM
Temperature Uncontrolled Heating Mantle operates at a temperature range of up to 380℃, providing efficient sample heating. It accommodates larger samples with a capacity of 5000 ml for r...
Temperature Uncontrolled Heating Mantle T-S218UHM
Temperature Uncontrolled Heating Mantle operates at a maximum temperature of up to 380℃ for efficient sample heating. It accommodates a larger sample volume with a capacity of 10000 ml. ...
Temperature Uncontrolled Heating Mantle T-S215UHM
Temperature Uncontrolled Heating Mantle features efficient sample heating with a capacity of up to 2000 ml. It operates within a wide temperature range of up to 380℃, ensuring consistent...
Temperature Uncontrolled Heating Mantle T-S216UHM
Temperature Uncontrolled Heating Mantle features a capacity of 3000 ml for reliable sample heating. It operates efficiently at a temperature of up to 380℃, ensuring uniform heat distribu...
Temperature Uncontrolled Heating Mantle T-S214UHM
Temperature Uncontrolled Heating Mantle features a 1000 ml capacity for efficient heating of liquid samples. It operates efficiently at a temperature range of up to 380℃ for reliable hea...
Temperature Uncontrolled Heating Mantle T-S213UHM
Temperature Uncontrolled Heating Mantle operates at a maximum temperature range of up to 380 °C for efficient sample heating. It accommodates a wide range of sample sizes with a heating ...
Temperature Uncontrolled Heating Mantle T-S211UHM
Temperature Uncontrolled Heating Mantle features a 100 ml capacity, ensuring reliable heating of a small volume of liquids. It operates at a temperature range of up to 380 °C, allowing p...
Temperature Uncontrolled Heating Mantle T-S212UHM
Temperature Uncontrolled Heating Mantle provides efficient heating of samples at a wide temperature range of up to 380 °C. It accommodates flasks with volumes of up to 250 ml, ensuring c...
Temperature Uncontrolled Heating Mantle T-S210UHM
Temperature Uncontrolled Heating Mantle operates at a maximum temperature range of up to 380℃, providing efficient sample heating. It can accommodate up to 50 ml of liquids, ensuring rel...
Standards
IEC 61010-2-010:2020-Particular requirements for laboratory equipment for the heating of materials
Complies with the above standards, but is not limited to them.
Features
1. Chemical-resistant top is durable and easy to clean.
2. Low-profile design and non-slip feet keep the unit stable.
3. Support rod and clamp options hold probes and glassware.
4. Separate hot and stir controls simplify combined procedures.
5. Stirring models combine heating and magnetic agitation.
FAQ
What are the main applications of the Temperature Uncontrolled Heating Mantle?
The Temperature Uncontrolled Heating Mantle is used to heat, warm or maintain samples and glassware at controlled temperatures. It supports routine chemistry, digestion, warming and sample preparation in teaching, research and quality-control laboratories.
What standards does the Temperature Uncontrolled Heating Mantle comply with?
The unit is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for laboratory heating equipment. Procedures should follow the applicable methods. Compliance documentation can be provided on request.
What warranty comes with the Temperature Uncontrolled Heating Mantle?
We provide a 12-month limited warranty on the instrument and its key working parts. Consumables, accessories and parts subject to normal wear are excluded, as is damage caused by incorrect operation or maintenance. An extended service plan is available on request.
Will staff need special training?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Temperature Uncontrolled Heating Mantle be calibrated?
The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.
Are consumables and spare parts easy to obtain?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can the Temperature Uncontrolled Heating Mantle be customised?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
How is the Temperature Uncontrolled Heating Mantle commissioned?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What maintenance and safety points matter?
Do not heat flammable materials directly, exceed the surface rating or leave heating unattended. Use heat-resistant gloves and suitable glassware. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.