Introduction
Low temperature incubators are specialized laboratory equipment designed to maintain and control a consistently low temperature environment, typically ranging from -10°C to 40°C. These units are essential for a wide range of scientific applications, including cell culture, pharmaceutical research, and microbiology, providing a stable and regulated atmosphere for the incubation of biological samples, enzymes, and sensitive materials. They are equipped with precise temperature controls, often featuring digital displays, alarms, and programmable settings to ensure the preservation and growth of specimens under carefully controlled conditions, making them indispensable tools in various research and industrial settings.
Low Temperature Cooling Incubator T-S285LCI
Low Temperature Cooling Incubator features a large 400 L capacity with a precise temperature range of +4 °C to 60 °C and ±0.1 °C stability. It features PID digital temperature ...
Low Temperature Cooling Incubator T-S284LCI
Low Temperature Cooling Incubator features a 250 L capacity with a temperature range of +4 °C to 60 °C and ±0.1 °C stability for precise incubation. It utilizes forced air circ...
Low Temperature Cooling Incubator T-S283LCI
Low Temperature Cooling Incubator comes with a 150 L capacity and a precise temperature range of +4 °C to 60 °C, for reliable sample incubation. It features forced air circulation ...
Low temperature cooling incubator T-S280LCI
Low temperature cooling incubator is specially designed to achieve low temperature incubation of the samples and biological reactions that demands it. With a temperature range of -10 to 6...
Low temperature cooling incubator T-S281LCI
Low temperature cooling incubator are specially designed to achieve low temperature incubation of the samples and biological reactions that demands it. With a temperature range of -10 to ...
Low Temperature Cooling Incubator T-S282LCI
Low Temperature Cooling Incubator a PID controlled unit features -10 to 65 °C of temperature range. Features polished stainless-steel chamber with semi-circular arcs and 3 shelves for ea...
Standards
ISO 11133:2014-Microbiology of food, animal feed and water-Preparation, production, storage and performance testing of culture media
Complies with the above standards, but is not limited to them.
Features
1. Removable inner door or glass door reduces heat loss on inspection.
2. Smooth stainless chamber with rounded corners is easy to clean.
3. Over-temperature and sensor-fault alarms protect samples.
4. Timer and continuous-run options suit different protocols.
5. Adjustable, removable shelves accommodate varied loads.
FAQ
What are the main applications of the Low temperature incubator?
The Low temperature incubator is used to maintain samples at a stable, controlled temperature for incubation, culturing, warming and general biological work. It is widely used in microbiology, clinical, food, pharmaceutical and research laboratories.
Which standards and regulations apply to the Low temperature incubator?
The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory incubators. Test and culture procedures should follow the applicable standard methods. Compliance documentation can be provided on request.
What does the warranty cover?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Is the Low temperature incubator difficult to operate?
Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Low temperature incubator need calibration or verification?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Where do we get replacement parts?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Are options or configurations available?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Is installation and commissioning included?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What should be avoided when using the Low temperature incubator?
Flammable, volatile or corrosive materials should not be placed in a standard incubator, and pathogenic agents require containment. Avoid overloading and clean spills promptly. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.