Introduction

Sample Concentrator is a microprocessor-controlled device that works by blowing nitrogen onto the sample surface. They feature a temperature range of up to 160° C, allowing optimal control over concentration process. Their built-in over-temperature protection ensures safe operation. They include an automatic fault detection and alarm function for enhanced safety. Our Sample Concentrator is widely applicable in residue analysis, commodity inspection, and various industries.

Visible Sample Concentrator T-VSC-S2100

Visible Sample Concentrator T-VSC-S2100

Visible Sample Concentrator features temperature control range RT+5 to 160℃. Its high-purity aluminum block ensures efficient heat transfer while resisting corrosion for long-lasting dura...
Sample Concentrator T-SCN-L2104

Sample Concentrator T-SCN-L2104

Sample Concentrator is built to provide temperature range of RT+5 to 160℃. It features microprocessor and PID fuzzy control for stable and consistent thermal performance. Equipped with an...
Sample Concentrator T-SCN-L2103

Sample Concentrator T-SCN-L2103

Sample Concentrator has temperature setting range of 0 to 160℃. It features nitrogen flow over sample surface to accelerate evaporation without exposing contents to oxygen. Equipped with ...
Sample Concentrator T-SCN-L2102

Sample Concentrator T-SCN-L2102

Sample Concentrator has nitrogen flow rate of 15 L/min. It features temperature deviation calibration for maintaining consistent results in long-term experiments. Equipped with adjustable ...
Sample Concentrator T-SCN-L2101

Sample Concentrator T-SCN-L2101

Sample Concentrator offers 2 blocks with nitrogen flow rate of 15 L/min. It features wide temperature control range and high stability for varied laboratory requirements. Equipped with cap...
Sample Concentrator T-SCN-L2100

Sample Concentrator T-SCN-L2100

Sample Concentrator is designed with 0 to 160℃ temperature setting range. It features microprocessor and PID fuzzy control for stable heating and consistent performance. Equipped with an ...
Water Bath Sample Concentrator T-WSC-S2100

Water Bath Sample Concentrator T-WSC-S2100

Water Bath Sample Concentrator offers maximum temperature of 99℃. It features base and supporting assembly with spring-loaded holder for secure and stable substance placement. Equipped wi...
Standard Sample Concentrator T-SCN-S2103

Standard Sample Concentrator T-SCN-S2103

Standard Sample Concentrator offers wide temperature range of RT+5℃ to 150℃. Built with independent nitrogen gas channels for each needle, allowing flexible gas flow adjustment. Its dual...
Standard Sample Concentrator T-SCN-S2102

Standard Sample Concentrator T-SCN-S2102

Standard Sample Concentrator features single block design and 0 to 12L/min nitrogen flow. Built with programmable temperature control ranging from ambient +5°C to 150°C. equipped with he...
Water Bath Sample Concentrator T-WSC-S2200

Water Bath Sample Concentrator T-WSC-S2200

Water Bath Sample Concentrator offers temperature range of room temperature to 100℃. It accommodates up to 12 samples, for efficient evaporation. Its independent adjustable needle valve a...
Sample Concentrator T-SCN-S2101

Sample Concentrator T-SCN-S2101

Sample Concentrator offers setting range of 5℃ to 150℃. Its air channel system improves sealing, reduces leakage, and enables easy lift or press needle switching. It features built-in ov...
Sample Concentrator T-SCN-S2100

Sample Concentrator T-SCN-S2100

Sample Concentrator offers setting range of 5℃ to 150℃. It features dual heating with dry bath at the bottom and nitrogen blowing on top. Its air channel system prevents leakage and enab...
Water Bath Sample Concentrator LWSC-S2102

Water Bath Sample Concentrator LWSC-S2102

Water Bath Sample Concentrator LWSC-A102 can process 36 samples increasing throughput and efficiency. It operates at a temperature range from RT + 5 °C to 100 °C ensuring uniform distrib...
Water Bath Sample Concentrator LWSC-S2101

Water Bath Sample Concentrator LWSC-S2101

Water Bath Sample Concentrator LWSC-A101 offers a temperature range from RT + 5 °C to 100 °C allowing for precise control over the heating of samples. It is designed with 24 holes for ef...
Water Bath Sample Concentrator LWSC-S2100

Water Bath Sample Concentrator LWSC-S2100

Water Bath Sample Concentrator LWSC-A100 is equipped with 12 holes allowing for simultaneous processing of multiple samples. It operates at a temperature range from RT + 5 °C to 100 °C. ...
Visible Sample Concentrator LSCC-L2101

Visible Sample Concentrator LSCC-L2101

Visible Sample Concentrator LSCC-B101 operates at a temperature range from RT + 5 °C to 150 °C. It is equipped with 1 heating block that provides an efficient and uniform concentration o...
Visible Sample Concentrator LSCC-L2100

Visible Sample Concentrator LSCC-L2100

Visible Sample Concentrator LSCC-B100 is designed to efficiently concentrate samples at a temperature range from RT + 5 °C to 150 °C. It is integrated with 1 block ensuring uniform heati...
Water Bath Sample Concentrator LWSC-L2101

Water Bath Sample Concentrator LWSC-L2101

Water Bath Sample Concentrator LWSC-B101 equipped with 24 holes allowing batch processing of samples under uniform conditions. It operates at a temperature range from RT+5 °C to 100 °C. ...
Water Bath Sample Concentrator LWSC-L2102

Water Bath Sample Concentrator LWSC-L2102

Water Bath Sample Concentrator LWSC-B102 enables precise control of sample heating within the range of RT+5°C to 100°C. It features a 36-hole configuration allowing for the simultaneous ...
Water Bath Sample Concentrator LWSC-L2100

Water Bath Sample Concentrator LWSC-L2100

Water Bath Sample Concentrator LWSC-B100 offers a temperature range from RT+5 °C to 100 °C and provides precise control over sample heating. It features a 12-hole configuration for proce...
Standard Sample Concentrator LSCC-S2101

Standard Sample Concentrator LSCC-S2101

Standard Sample Concentrator LSCC-A101 is equipped with 2 heating blocks for the processing of multiple samples. It offers a temperature range of RT + 5°C to 150°C, ensuring precise and ...
Standard Sample Concentrator LSCC-S2100

Standard Sample Concentrator LSCC-S2100

Standard Sample Concentrator LSCC-A100 operates from RT + 5°C to 150°C and provides controlled heating for sample preparation and analysis. It offers a nitrogen flow rate range from 0 to...
Sample Concentrator T-S224SC

Sample Concentrator T-S224SC


Sample Concentrator operates within a temperature range of 0 °C to 160 °C, delivering rapid evaporation. It features advanced microprocessor control for precise operation. It is equip...
Sample Concentrator T-S223SC

Sample Concentrator T-S223SC


Sample Concentrator operates at 0 °C to 160 °C with a nitrogen gas flow rate of 23 L/min. It is equipped with a microprocessor system for precise thermal control and enhanced reliabil...
Sample Concentrator T-S217SC

Sample Concentrator T-S217SC


Sample Concentrator operates within a temperature range of 5  °C to 160  °C, delivering efficient and uniform evaporation. It features adjustable nitrogen flow of 15 L/min, allowing ...
Sample Concentrator T-S216SC

Sample Concentrator T-S216SC


Sample Concentrator provides a temperature range of RT+5 °C to 160 °C, enabling fast and controlled evaporation. It is equipped with PID fuzzy control for stable heating and consisten...
Sample Concentrator T-S215SC

Sample Concentrator T-S215SC


Sample Concentrator provides a temperature range of 0 °C to 160 °C for efficient solvent removal. It integrates PID fuzzy control technology, delivering consistent heating and uniform...
Sample Concentrator T-S214SC

Sample Concentrator T-S214SC


Sample Concentrator operates at a temperature range of 0  °C to 160  °C for efficient solvent evaporation. It is equipped with PID fuzzy control for stable and precise temperature reg...
Sample concentrator T-S222SC

Sample concentrator T-S222SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S221SC

Sample concentrator T-S221SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S220SC

Sample concentrator T-S220SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S213SC

Sample concentrator T-S213SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S212SC

Sample concentrator T-S212SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S211SC

Sample concentrator T-S211SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S210SC

Sample concentrator T-S210SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample concentrator T-S230SC

Sample concentrator T-S230SC


Sample Concentrators are microprocessor controlled units that accelerate the concentration of multiple samples in a fast and convenient way. Available with single and double block heaters...
Sample Concentrator SC20620

Sample Concentrator SC20620


Sample Concentrator offers a temperature range of up to 160°C, making it designed for managing a high throughput of samples. It features advanced gas flow technology with adjustable air ...
Sample Concentrator SC2062

Sample Concentrator SC2062


Sample Concentrator 162 offers an impressive temperature range of up to 160° for handling a high throughput of samples. Equipped with precision-controlled heating to ensure efficient sam...

Standards

Complies with the above standards, but is not limited to them.

Features

1. Exhaust or condensation options manage solvent vapour.

2. Multiple positions process several samples in parallel.

3. Controlled gas flow and temperature evaporate solvent gently.

4. Clear display shows temperature, time and gas settings.

5. Timer and automatic shut-off support unattended runs.

FAQ

What are the main applications of the Sample Concentrator?

The Sample Concentrator is used to concentrate samples by evaporating solvent under gentle conditions. It supports analytical, environmental, biological and residue laboratories preparing samples for analysis.

Which standards and regulations apply to the Sample Concentrator?

The unit is designed with reference to IEC 61010 electrical safety, applicable sample-preparation practice and relevant GB/T standards. Procedures should follow the relevant method. Compliance documentation can be provided on request.

How long is the warranty period?

The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.

Will staff need special training?

Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.

What is the typical lead time for order delivery?

Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

How often should the Sample Concentrator be calibrated?

Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.

Are the consumables universal or proprietary?

Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.

Are options or configurations available?

Yes, common options include different ranges, voltages, accessories, interfaces and capacity or size configurations. We confirm feasibility, specifications and any delivery impact before order confirmation. Custom requirements are reviewed case by case.

Do you provide on-site installation?

Standard installation is straightforward and supported by the manual and start-up documentation. Our technical team can guide staff remotely through checks and validation. On-site commissioning is available as a quoted service.

What maintenance and safety points matter?

Do not evaporate hazardous solvents without ventilation or trapping, overheat samples or block gas paths. Follow laboratory safety rules.

Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.

Inquiry