High-Low Temperature Test Chamber LTTC-T2011

Introduction

High-Low Temperature Test Chamber is equipped with advanced a SUS304 stainless steel inner tank for corrosion resistance. It includes a cold-rolled steel outer shell with electrostatic powder coating for enhanced durability. This chamber features a 7-inch touchscreen controller for easy use. It offers safety features like over-temperature, overcurrent, and compressor protection. Our chamber supports product development, quality control, and regulatory compliance by simulating real-world environmental conditions.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our chamber aids in product development, quality checks, and standard compliance by replicating real-world temperature and humidity conditions, ensuring products meet performance, safety, and durability expectations across environments.

Specifications

Capacity	150 L
Temperature Range	- 20 ℃ to + 150 ℃ (Optional + 180 ℃)
Temperature Uniformity	Less than or equal to 2.0 °C
Temperature Fluctuation	± 0.5 ℃
Heating Rate	- 20 ℃ to + 100 ℃ (3 ℃/min)
Cooling Rate	+ 20 ℃ to – 20 ℃ (3 ℃/min)
Operating Ambient Temperature	5 °C to 35 °C
Floor Space	0.98 m²
Controller	7-inch touch screen controller
Communication Interface	, /485, and
Refrigeration System	Hermetic compressor, single stage or cascade refrigeration system
Interior Chamber Material	SUS304 stainless-steel plate
Exterior Chamber Material	High quality cold rolled steel plate, surface electrostatic powder coating
Insulation Material	Rigid polyurethane foam insulation layer, flame retardant grade B2
Power Consumption	5 KW
Power supply	AC 380V ±10% 50Hz / AC 220V ±10% 50Hz
Internal Dimensions	600 × 600 × 460 mm
External Dimensions	800 × 1715 × 1230 mm
Package Dimensions	1100 × 2020 × 1770 mm
Net Weight	550 Kg
Gross Weight	600 Kg

Features

Rapid Temperature Recovery

Adjustable Shelving System

Safety Mechanisms

Quiet Operation

Anti-Condensation Protection

FAQs

1. What kind of controller interface does the High-Low Temperature Test Chamber offer for test customization?

The High-Low Temperature Test Chamber is equipped with a modern touchscreen controller that supports programmable settings for both temperature and humidity profiles. Users can create, save, and modify multi-step testing programs with precise timing and ramp rates. This flexibility allows for simulation of real-world environmental changes over extended durations. The interface typically supports graphical display, multilingual options, and data logging capabilities. It also includes alarms for deviations and faults, helping users monitor test conditions in real-time. Remote monitoring and data export features are often included depending on configuration. Overall, the controller enhances usability and reduces the potential for operator error.

2. Is the High-Low Temperature Test Chamber chamber suitable for low-volume laboratories?

Yes, the High-Low Temperature Test Chamber is particularly well-suited for laboratories with limited space or lower sample volume requirements. Despite its compact size, it retains all the functionality and precision found in larger chambers. The small footprint allows it to fit in crowded lab environments without compromising performance. It's ideal for testing individual components, small batches, or research samples where precision is more important than capacity. Its mobility, ease of installation, and reduced power consumption also make it an efficient choice for academic and R&D settings. Users benefit from full-featured environmental simulation without the scale or cost of larger units.

3. How is long-term reliability ensured in the High-Low Temperature Test Chamber ?

The High-Low Temperature Test Chamber is built with long-lasting components like stainless steel interiors, reliable compressors, and advanced insulation that reduce wear over time. Its electronics and sensors are designed for accuracy and repeatability, even under continuous operation. The system’s control software monitors internal performance and can alert users to maintenance needs, reducing downtime. Routine calibration is supported through easily accessible ports and standard protocols. It’s also equipped with surge protection and fault detection systems to prevent unexpected damage. These design choices ensure the chamber delivers consistent results over many years, even in demanding industrial environments.

4. How does the High-Low Temperature Test Chamber support compliance and traceability in regulated industries?

The High-Low Temperature Test Chamber includes data logging functions that help document all environmental parameters throughout a test cycle. With options for export and PC connectivity, users can maintain detailed records for audits and quality checks. This is particularly beneficial in regulated industries such as pharmaceuticals, aerospace, and electronics manufacturing where traceability is essential. The system logs alarm events, temperature and humidity trends, and user interactions. Its controller often supports password protection and user access levels to meet Good Laboratory Practice () standards. These features make the R suitable for validation and documentation-heavy environments. It ensures your test data is both secure and review ready.

5. What maintenance practices are required to ensure consistent chamber performance?

To maintain optimal performance, regular inspection of the humidity system, seals, and air filters is recommended. Periodic calibration of the temperature and humidity sensors helps ensure test accuracy. The refrigeration system should be serviced annually to check for coolant levels and compressor condition. The chamber's stainless-steel interior allows for easy cleaning with non-abrasive solutions. Door gaskets should be inspected for wear to prevent heat and moisture loss. Additionally, ensuring the chamber is placed in a stable ambient environment enhances its performance and lifespan. Following these maintenance steps will help prolong system reliability and reduce downtime.