Biochemical Incubator LBCI-T2012

Introduction

Biochemical Incubator offers a capacity of 400L and offers a temperature range of 0°C to 60°C, making it suitable for both cooling and heating needs. It comes with a fully enclosed compressor that ensures efficient and quiet performance. The shelf space of our biochemical incubator is adjustable, allowing you to organize storage as needed. Its interior is made of 304 mirror-finish stainless steel with rounded corners, making it easy to clean and maintain.

It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Biochemical Incubator is used in research and production for environmental protection, disease control, agriculture, aquaculture, and cell culture.

Specifications

Capacity	400L
Temperature Range	0 to 60°C
Temperature Fluctuation	High Temp ±0.5°C, Low Temp ±1.0°C
Temperature Uniformity	±1.5°C
Refrigeration System	fully enclosed compressor
Controller	Microcomputer controller
Dual Protections	Independent over-temperature protection system, with light
Shelf	3
Ambient Temperature	+5 to 35°C
Interior Material	Mirror surface Stainless Steel 304
External Material	Steel powder coated
Voltage Supply	AC 220V ±10% 50Hz
Safety Device	Compressor and blower overheat protection, over-temp, overpressure & overload
Maximum Power	1 kW
Interior Dimensions	600 × 700 × 950 mm
External Dimensions	780 × 1060 × 1750 mm
Packaging Dimension	840 × 1150 × 1920 mm
Gross Weight	250 Kg

Features

Air duct system

Protection system

Internal light

Microcomputer temperature controller 

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.

1. What is the capacity and temperature range of the It Biochemical Incubator , and why is it suitable for various applications?

The It Biochemical Incubator has a large capacity of 400 liters and offers a temperature range from 0°C to 60°C, which makes it suitable for both cooling and heating applications. This wide temperature range is ideal for processes that require controlled environmental conditions such as cell culture, agricultural testing, aquaculture, disease control, and environmental protection research. The flexibility in temperature settings allows it to be used across various biological and biochemical research and production applications.

2. What features make the It an efficient and user-friendly biochemical incubator?

The It is designed with several advanced features to ensure efficiency, safety, and ease of use. It is equipped with a fully enclosed compressor that provides quiet and energy-efficient refrigeration. The incubator includes a microcomputer temperature controller for precise regulation, and the air duct system ensures even temperature distribution inside the chamber. Additionally, the adjustable shelves allow users to organize the interior according to their storage needs. It also features internal lighting, dual over-temperature protection, and rounded-corner 304 mirror-finish stainless steel interiors, making it easy to clean and maintain.

3. How does the It Biochemical Incubator maintain temperature accuracy and safety during operations?

The It is designed to maintain stable and uniform temperature throughout the incubation process. It has a temperature fluctuation of ±0.5°C at high temperatures and ±1.0°C at low temperatures, with an overall temperature uniformity of ±1.5°C. The microcomputer controller ensures accurate temperature regulation, while the independent over-temperature protection system provides safety by preventing overheating. Additionally, the incubator includes compressor and blower overheat protection, overpressure, and overload safeguards, making it reliable for long-term use in sensitive experiments.

4. In what fields or industries is the It Biochemical Incubator commonly used?

The It Biochemical Incubator is a versatile piece of equipment used across various industries and research fields. It is commonly used in environmental protection studies, agriculture, aquaculture, cell culture, and disease control research. Its ability to provide a controlled environment makes it especially suitable for incubating samples, growing microbial cultures, and conducting temperature-sensitive experiments. Due to its advanced features, large capacity, and precise temperature control, it is a preferred choice in research labs, universities, biotech companies, and environmental testing facilities.