Temperature And Humidity Test Chamber LTHC-T2014

Introduction

Temperature and Humidity Test Chamber has an 800 experiments.

This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Temperature and Humidity Test Chamber is a testing device that simulates specific environmental conditions to evaluate product performance and durability. It is widely used in industries like electronics, automotive, and pharmaceuticals for quality control and research.

Specifications

Capacity	800 L
Temperature Range	-20℃ to +150℃
Temperature Fluctuation	±0.5℃
Temperature Uniformity	≤2.0℃
Temperature Deviation	±2.0℃
Heat-up Rate Non-linear	-20℃ to +100℃ 35 min
Cool-down Rate Non-linear	+20℃ to -20℃ 45 min
Humidity Range	20% R.H to 98% R.H
Humidity Fluctuation	±2.0 %RH
Humidity Uniformity	±3.0 %RH
Humidity Deviation	±3.0 %RH (>75%RH)
Noise Level	≤68 dB
Power Consumption	12 kW
Electrical Supply	AC 3ψ4 W 380 V 50 Hz
Dimensions (W × D × H)	800 × 1000 × 1000 mm
External Dimensions (W × D × H)	1200 × 1980 × 1825 mm

Features

Long-lasting performance

Flexible sample placement

Advanced sensor technology

Minimal energy consumption

Automatic alarm notifications

FAQs

1. How does a Temperature and Humidity Test Chamber help in product development?

These chambers allow manufacturers to accelerate aging tests, identify material weaknesses, and ensure product stability before mass production. This helps improve design quality and reduce failure risks in real-world conditions.

2. What humidity control methods are used in the Temperature and Humidity Test Chamber?

It chambers use steam humidification and dehumidification systems to regulate moisture levels precisely. The chamber’s humidity sensors and controllers continuously adjust humidity conditions to maintain test accuracy.

3. How does condensation affect test results of Temperature and Humidity Test Chamber?

Excessive condensation can lead to corrosion, electrical failures, and material degradation. It chambers are designed to minimize condensation buildup using efficient airflow systems and moisture drainage mechanisms, ensuring reliable test conditions.

4. What types of sensors are used to measure temperature and humidity?

It chambers are equipped with high-precision Pt100 temperature sensors and capacitive humidity sensors that provide accurate, real-time monitoring and control for consistent testing.

5. How can I reduce energy consumption while operating the chamber?

To optimize energy efficiency, users should avoid frequent door openings, set optimal test parameters, use power-saving modes, and schedule tests during off-peak hours. It chambers feature energy-efficient cooling and heating systems to reduce power consumption.

6. Can the Temperature and Humidity Test chamber be integrated into an automated testing system?

Yes, It chambers can be integrated with automated testing setups, data acquisition systems, and programmable logic controllers (PLCs) for seamless operation in industrial and research environments.

7. How often should filters and water tanks be cleaned in the Temperature and Humidity Test Chamber?

It recommends cleaning the air filters every few months and using distilled or deionized water to prevent scaling in the humidification system. The water tank should be drained and cleaned regularly to maintain optimal humidity control.

8. What factors can influence the accuracy of test results in a Temperature and Humidity Test Chamber?

Factors such as sample placement, chamber load capacity, airflow obstruction, and external environmental conditions can affect accuracy. Proper calibration, sensor maintenance, and chamber loading techniques help ensure precise results.