Plasma Autoclave LPA-T2011

Introduction

Plasma Autoclave has a sterilization chamber with a capacity of 135L. It operates at temperatures between 40℃ and 60℃, using 58% to 60% hydrogen peroxide as the sterilizing agent. This autoclave uses pre-filled hydrogen peroxide cartridges for precise, automatic dosing. The system features a high-quality 5052 aluminum chamber and is controlled by a Siemens . Our Plasma Autoclave chamber door uses a jack-driven lift and light-sensing sensor for automatic, hands-free operation. It uses high-temperature and high-pressure steam to achieve effective sterilization of laboratory equipment, media, and waste. The advanced control system ensures thorough sterilization while preventing overheating or pressure buildup.

Applications

Plasma Autoclave is widely used in and medical institutes for sterilizing electric wires, cables, optical glasses, power equipment, endoscopes, catheters, and other heat-sensitive instruments.

Specifications

Capacity	135 L
Operating Temperature	40°C to 60°C
Heating Method	Electric Heating
Sterilization Agent	58% to 60% Hydrogen Peroxide
Display	7- inch Touch Screen
Maximum Anti-Stress Value	10 Pa
Operation Height	≤160 cm
Total Cycle Time	Short cycle 30 min Long cycle 50 min
Material of Sterilization Room	5052 Aluminum, Thickness ≥ 8 mm
Noise	< 60 db
Electrode Mesh Material	5052 Aluminum Alloy, Thickness ≥ 2 mm
Sealing Door Material	5052 Aluminum Alloy, Thickness ≥ 15 mm
Loading Method	Upper and lower aluminum alloy punching plates
Door Opening Method	Jack-driven electric lifting door, light-sensing infrared sensor switch
Door Anti-Pinch Function	Door barrier switch
Cavity Temperature Heating Power	Preheating time ≤30 min
Main Insulation	≥20 mm Rubber and Plastic Sponge
Installation Environment	10°C to 40 °C
Door Type	Automatic vertical single door
Standard Sterilization Time	35 to 55 min
Data Storage	Stores and records data for 500 cycles
Air Filter	≤ 0.22μm
Plasma Power Supply	Transistor control, ≤ 800W power
Power	4.2
Power Supply	AC 220V, 50Hz
Packaging Dimension	1220 × 920 × 2720 mm
Chamber Size	1120 × 790 × 1770 mm
Outer Size	750 × 440 × 400 mm
Net Weight	272 Kg
Gross Weight	362 Kg

Features

Cartridge filling method

7-inch touchscreen

Thermal printer

Biological indicator

Sensors and Alarm System

Oil mist filtration system

Evacuation Control Valve

FAQs

1. What is the recommended sterilization cycle for different types of laboratory materials?

The recommended cycle depends on the material type: 1) For glassware and heat-resistant materials: 121°C, 15-20 psi, for 15-20 minutes; 2) For liquid media: 121°C, 15-20 psi, for 20-30 minutes (longer for larger volumes); 3) For wrapped instruments: 121°C, 15-20 psi, for 25-30 minutes to ensure steam penetration; 4) For waste materials: 132°C, 30 psi, for 30 minutes for biohazardous waste; 5) For heat-sensitive materials: Use a lower temperature (115°C) for a longer duration (30 minutes) or a specialized cycle if available. Always refer to the material manufacturer's recommendations.

2. How to properly load the autoclave to ensure effective sterilization?

Proper loading is crucial: 1) Place items in a way that allows steam to circulate freely around all surfaces; 2) Avoid overloading the autoclave chamber, leaving at least 2-3 inches of space between items; 3) Stack items with openings facing downward to prevent water accumulation and ensure steam penetration; 4) Use autoclave-compatible containers and avoid sealing them tightly (leave lids loose or use vented caps); 5) Separate different types of materials if possible, especially liquids and solids; 6) Ensure that liquid containers are not filled more than 2/3 full to prevent boiling over.

3. What maintenance procedures are required for the autoclave?

Regular maintenance includes: 1) Draining and cleaning the water reservoir after each use to prevent mineral buildup; 2) Descaling the autoclave monthly (or more frequently in hard water areas) using a recommended descaling agent; 3) Inspecting the door gasket for wear, cracks, or damage and replacing it if necessary; 4) Checking the pressure relief valve and safety interlocks quarterly to ensure proper operation; 5) Cleaning the chamber interior with a mild detergent after each use; 6) Performing annual calibration of temperature and pressure gauges by qualified personnel; 7) Keeping a maintenance log to track all service activities.

4. How to troubleshoot if the autoclave fails to reach the desired temperature or pressure?

If temperature/pressure issues occur: 1) Check if the water level in the reservoir is sufficient; 2) Verify that the door is properly closed and sealed (check gasket for damage); 3) Inspect the heating element for signs of malfunction; 4) Check the pressure relief valve to ensure it is not stuck open; 5) Clean the steam vents and drains to remove any blockages; 6) Ensure the autoclave is properly grounded and the power supply is stable; 7) If the problem persists, do not use the autoclave and contact technical support immediately, as it may pose a safety risk.

5. What safety precautions should be followed when operating the autoclave?

Important safety precautions: 1) Never open the autoclave door while it is pressurized or during the sterilization cycle; 2) Allow the autoclave to cool down and depressurize completely before opening; 3) Wear heat-resistant gloves and eye protection when handling hot items; 4) Stand to the side of the autoclave when opening the door to avoid steam burns; 5) Never autoclave incompatible materials (such as volatile solvents, oils, or explosives); 6) Regularly test the autoclave's performance using biological indicators (spore tests) to ensure effective sterilization; 7) Familiarize yourself with the emergency stop procedures and location of safety devices.