Constant Temperature And Humidity Incubator LTHI-T2023

Introduction

Constant Temperature and Humidity Incubator is designed with a 500 operation allows precise regulation of temperature, humidity, and time. Our incubator supports environmental simulations for raw material testing, product packaging, and product life assessments.

It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Our Constant Temperature and Humidity Incubator is used for stability testing and environmental simulation in pharma, textile, and food industries. It is deal for testing raw materials, packaging, and product life cycle under controlled conditions.

Specifications

Capacity	500 L
Temperature Control Range Without Humidifying	5 to 50°C
Temperature Control Range With Humidifying	10 to 45°C
Temperature Fluctuation	± 1°C
Humidity Range	50 to 90% RH
Humidity Fluctuation	± 5% to ± 8%
Timer	0 to 9999 min or continuous
Grid Standard/Max	3/6
Power Supply	220 V 50 Hz
Power	1500 W
Dimensions	840 × 910 × 1770 mm
Packing Dimension	940 × 1000 × 1900 mm
Net Weight	180 kg
Gross Weight	230 kg

Features

Over temperature alarm

Continuous or timed operation

Stainless-steel chamber

Ultra-mild sensor abnormal protection 

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.

1. What is the temperature and humidity control range of the Constant Temperature and Humidity Incubator ?

Constant Temperature and Humidity Incubator offers a temperature control range of 5°C to 50°C without humidifying and 10°C to 45°C with humidifying. The humidity control range is 50% to 90% RH, with fluctuations between ±5% and ±8%. This makes it suitable for a variety of experimental conditions where both parameters must be tightly regulated.

2. What safety features are integrated into the Constant Temperature and Humidity Incubator ?

The Constant Temperature and Humidity Incubator is equipped with an over-temperature alarm that protects sensitive samples and prevents equipment damage. The microcomputer control system ensures automatic regulation, enhancing operational safety during extended use.

3. What features help maintain environmental stability in the Constant Temperature and Humidity Incubator ?

Constant Temperature and Humidity Incubator includes ultrasonic humidification for uniform moisture distribution, a built-in dehumidification vent to manage excess moisture, and a duct vent for controlled air exchange. These features work together to maintain a balanced internal environment, ensuring reliable test results over extended periods.

4. Does the Constant Temperature and Humidity Incubator support timed and continuous operation?

Yes, our Constant Temperature and Humidity Incubator is designed for both timed and continuous operation. It includes a programmable timer ranging from 0 to 9999 minutes, allowing flexibility for various experimental protocols and long-term stability testing.