Water Jacketed CO2 Incubator LWJI-T2021

Introduction

Water Jacketed CO2 Incubator within a power range of room temperature +5 to 60℃ with stability of ≤±0.2℃. Imported infrared CO₂ sensor with gold‑plated probes for precise, long-lasting performance. CO₂ levels adjustable from 0–20%, with alerts for over-concentration or slow concentration rise. Equipped with forced convection fan, ensuring uniform temperature and balanced CO2 concentration. Widely used in modern biology and agriculture science for the culture of biological cells.

It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Our Water Jacketed CO2 Incubator is widely used in modern biology, chemistry and agriculture science for the culture of biological cells and tissues.

Specifications

Chamber Volume	160L
Temperature Range	RT+5 to 60℃
Temperature Stability	Less than or equal to ±0.2℃
Temperature Uniformity	Less than or equal to ±0.3℃
CO2 Range	0 to 20%
CO2 Control Accuracy	± 0.1% (Imported sensor)
Operating Temperature	+18 to 30℃
Humidity Method	Natural Vaporization
Power Consumption	900W
Power Supply	AC220V,50HZ
Chamber Size (W×D×H)	500mm × 510mm × 650mm
Exterior Size	650mm × 730mm × 1050mm
Weight	130Kg

Features

Over‑temperature protection

Overheating alarm system

filtration

Adjustable internal shelving 

Built‑in UV Sterilizer

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.

1. How stable and uniform the environment is inside the Water Jacketed CO2 Incubator ?

It Water Jacketed CO2 Incubator operates within a temperature range of room temperature +5°C to 60°C. It offers excellent temperature stability of less than or equal to ±0.2°C and temperature uniformity of less than or equal to ±0.3°C, ensuring precise environmental control. Humidity is maintained through natural vaporization. The incubator utilizes an imported infrared CO2 sensor with gold-plated probes for precise and long-lasting CO2 measurement. You can adjust CO2 levels from 0% to 20%.

2. What safety features does the Water Jacketed CO2 Incubator include?

Water Jacketed CO2 Incubator is equipped with a forced convection fan that ensures uniform temperature distribution and a balanced CO2 concentration throughout the chamber. The incubator features over-temperature protection and an overheating alarm system to ensure safe operation. It has alerts for over-concentration or a slow concentration rise, ensuring optimal CO2 levels for your cultures.

3. What is the primary use of the Water Jacketed CO2 Incubator ?

Water Jacketed CO2 Incubator features microprocessor controlled CO2 Incubators. They ensure optimum environment for cell and tissue culture growth. It is built with corrosion resistant stainless steel. The robust design is ideal for industrial environment. It is designed for the culture of biological cells and tissues, making it widely used in modern biology, chemistry, and agriculture science.

4. How does the Water Jacketed CO2 Incubator maintain a sterile environment?

Water Jacketed CO2 Incubator is equipped with UV sterilization to control contamination. When the door is opened, the fan and the CO2 intake valve are automatically turned off, and heating is stopped. This reduces contamination from ambient air entry. It uses natural evaporation for humidification to ensure the chamber maintains good humidity levels. It also features leakage protection and a spare mechanical thermostat to ensure continued operation even if the main temperature control fails.